TON of 77 parts LOWER PRICES

[jskink]

PRICES LOWERED

I am Parting out my would-be project 1977 Bronco. Have to raise money for a daily driver since my s10 blazer has a cracked block (parting out aswell). Here is what I have.

culpeper, va 22701

find the picture thumbnail key.jpg it is a preview of all of the pictures so you know what your looking for

http://www.radford.edu/~jskinker/bronco

Let me know if you have trouble with the link, I'm encountering some permissions issues with the server.

From the Body:
gas peddle assembly $20
brake peddle assemly $30 SOLD
back seat (needs to be reapolstered)
Heater assemby (works) $25
Wipper motor and arms (works) $80
Automatic stearing colum $80
3 spoke stearing wheel
headlights
sidemarkers
hood with functional scoop
dash pad $60
2 doors (need work) $45
top w/glass (a little rust) $80

Frame (needs some attention and a good sanding) cheep with other purchase
rear '77 BB 9" $250
Front D44 w/ Diskbrakes (warn hubs) (both with factory internals, 4.11 i believe) $300
front, rear drive shafts $50 per
c4 $250
302
Power steering box and pump $300
cooling fan
radaitor $30
power brake assembly $150
D-20 (j-shifter) $175
j - shifter $45
intermidate housing $75
above 3 items: $250

4 - 35" X 15" / 15" rim Supper Swamper TSL's $500

Take it all for $1500

there have been a lot of inquaries about the p/steering, p/brakes and the shipping price. I will try to find sometime to figgure that out.

Thats the list I've compiled after being in the garage for the afternoon. If you are looking for something that is not listed please inquire, I may have overlooked. If it is a body part it was probly trashed as the body was in rough shape.

ALL OFFERS WELCOM, everything has to go and pick-up buys are perfered.

Pick up only for large parts.

paypal accepted (perfered) + 3%fee
thanks
jskink02@yahoo.com

 

[Grunt1058]

How are your drive shafts? They both in good working order? Are they stock?

I NEED a front. I could use a good rear.

 

[Grunt1058]

Also, how much tread is left on those TSLs?

 

[jskink]

The drive shafts are stock, they are in useable condition (i.e. look fine and were working the last time the vehicle was run 4 yrs ago). I'm not sure how much tred % wise is left, you can see from the pictures that they still have a good deal of tred left.

thanks

jeff

 

[Grunt1058]

I forgot to look at the pictures.

looking now.

 

[Grunt1058]

Tires seem to be in pretty good shape. But, the driveshafts look to be much to rough.

Thanks anyways.

 

[Tito]

Was wondering shipping cost on the auto column to 97015, also is all the linkage included?

 

[70bravo]

Brake pedel

What's shipping to 90066 So.Cal?
Thanks, bravobernard@comcast.net

 

[jeffncs]

Interested in some pictures of the steering wheel. Is it stock or Grant?

Jeff

 

[JohnJohn]

I am intersted in most of your parts if not all and I live in VA. Shoot me an email.

John
mail@ragersworld.com

 

[va bronco]

Do you have the tub? if so how much? Email me at jeeperscreatures@yahoo.com.

 

[halfcab66]

Do you have the interior quarter trim panels, If so how much? Thanks
Nick

 

[77Bronco636]

carberator

Is that the stock 2bb carb on the 302? if so do you want to sell it? and how much?

 

[jskink]

I have the tub, but you probly don't want it a lot of rust and rivited/ rusted sheet metal.

 

[fordguy]

e mail sent

 

[69marquisragtop]

Do you have a stock front sway bar?

 

[jskink]

I don't know that it is stock, but I will check. Also I will be away until next friday so I will do my best to retun everyone's pm's and e-mail's then.
jeff

 

[KManuel]

p/s

is the power steering still available?

kevin

 

[Bronkster]

auto steering column

very interested in auto steering column and any available linkage. Please email

 

[76FordBronco]

C4 Tranny

Do you still have the tranny? How did it run when removed? Bottom line price with pickup?
How far are you from Ft Lee, VA?