sellitall
Bronco Guru
Will the 34x9.5x15 fit with the stock rim on an uncut EB with 3.5" lift? I'm planning on this combo if it will work.
Community
Message Forum
Photo Gallery
Event Calendar
Book Reviews
Bronco Wallpaper
Bronco FAQ
Link Back to CB!
Photo Gallery
Event Calendar
Book Reviews
Bronco Wallpaper
Bronco FAQ
Link Back to CB!
Buy / Sell
Bronco Tech
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
uncut EB with 3.5" suspension lift and 34" TSL on stock rims
- Thread starter sellitall
- Start date
johnmlebel
Bronco Guru
- Joined
- Jun 17, 2007
- Messages
- 1,368
it will prob rub
yANK
Bronco Guru
Yes It Will Rub I Had To Do 3.5 With One Inch Body Lift And That Gave Me Room For 33 10;50 Super Swapers I Use Mine Off Road And Does Not Hit If You Are Staying On Road It Will Work With 34 Off Road Might Hit
71HLFCAB
Full Member
It will be very close. I finally got a set of 33x9.50x15" BFG All Terrains on stock steel wheels and it fits pretty good, rubs on the radius arm though. 34's might be a little close, which tires are you looking at? Good luck.