• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

WH Extreme Duty output shaft assembly

addicted

Bronco Guru
Joined
Jun 7, 2009
Messages
1,936
Loc.
Broussard, Louisiana
Anybody running one of these? When I ordered mine the salesman siad I would be good to go with my stock speedo cable and connection but thats not the case. The hole in the housing is quite a bit bigger and I dont see how the stock stuff would work. Im offshore working so I cant call. I did email them a few days ago but I havent gotten a reply back yet. So any idea what I need to make it work? And if Im going to be running 35s which gear would I need. Thanks
 

broncotime

Bronco Guru
Joined
Jun 30, 2003
Messages
1,186
Loc.
Grapevine, Texas
Anybody running one of these? When I ordered mine the salesman siad I would be good to go with my stock speedo cable and connection but thats not the case. The hole in the housing is quite a bit bigger and I dont see how the stock stuff would work. Im offshore working so I cant call. I did email them a few days ago but I havent gotten a reply back yet. So any idea what I need to make it work? And if Im going to be running 35s which gear would I need. Thanks
I have one but I can't remember if it I purchased the entire assembly of installed it into an extra output housing I had on the shelf. I think I got the whole assembly and no problems installing the stock speedo cable gear into it.

WH are good folks, gove them a shout and they can set you straight for sure.

Good luck
 
OP
OP
addicted

addicted

Bronco Guru
Joined
Jun 7, 2009
Messages
1,936
Loc.
Broussard, Louisiana
Yea, I've had nothing but good service from them. Im sure it was just a simple mistake. The assembly came with a flat round aluminum plug for the hole and after checking the website again just now it says its for use with a gps speedo. I guess I needed to order the kit but the guy siad I didnt. The one I got and the kit are just one # off so Im sure thats all it was. And since I still need to find the right speedo gear and rebuild the case, its not a big deal.
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I have the WH output but I didn't do the complete assembly, I bought the kit that you install in a stock housing and the stock speedo cable works with no problems. Been running it for about 4 years.
 

ManTruck

Bronco Guru
Joined
Apr 17, 2003
Messages
1,269
I bought the assembled kit, and bought a new speedo and changed the gear. I researched for my 35's and found what i wanted on the AA site I believe. It was a grey gear if I remember right. I am not at my home PC but I believe I have the data on it. WH can help. My choice for the speedo gear was the correct choice due to my checking and confirming I am with in +- 2 mph off. I am happy with that.
 
Top