• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Windshield frame (lower?) seal

mebco09

Sr. Member
Joined
Aug 13, 2018
Messages
470
I am reinstalling my windshield frame after 10 years of being apart. Does anything go underneath the hinge portion as far as sealant? I have the seal that pinches between the hinge.

As far as sequence goes, I am putting my dash back in as well. Should I put the dash in before I put the windshield frame back on, or does it matter?

Any tricks to keeping this assembly watertight (ish)?
 

00gyrhed

Bronco Guru
Joined
Aug 3, 2006
Messages
2,428
the trick is the channel has to be clean and almost perfect. not to say a lot of people never have any issues but if you run a soft top it will leak t some point. the windshield just moves too much. I made a bracket to hold the WS tight to my cage. It still developed a leak so i just welded it up. I had a CJ5 for 30 years before i got my bronco and I only let the window down when quail hun ting in warm dry weather, so not much. Since I never planned to quil hunt from the beonco I just welded it up.
 
Top