wiper motor wire id's

[rnrmp]

installing a painless wiring kit. trying to tell what the red, blue wires are and then the black, white wires. one is high speed, a low speed, power and park

 

[mike mac]

I'm doing the full painless also and have a Red labeled park and also a Green labeled park. When the green is hooked up I get motion but they don't park. When I hook the Red up I get power on with switch Off. I'm calling Painless tomorrow I'll post my answer and maybe it will help you.

 

[rnrmp]

i found a diagram looks like white is low speed, black high speed, blue is park and red is power. Can anyone confirm this?

 

[bronko69er]

i found a diagram looks like white is low speed, black high speed, blue is park and red is power. Can anyone confirm this?

Thats the way it looks to me.

Red = constant 12v +

Blue = park (connects to power in all motor postions except park, returns motor to park when switch is turned off)

White = low (connects to power in switch position low)

Black = high (connnects to power in switch postion high)

 

[backpain]

are these the stock electric motor wires you're speaking of (or wires in the painless harness)

 

[rnrmp]

the stock wires coming from the wiper motor

 

[SeaBiscuit68]

I'm doing the full painless also and have a Red labeled park and also a Green labeled park. When the green is hooked up I get motion but they don't park. When I hook the Red up I get power on with switch Off. I'm calling Painless tomorrow I'll post my answer and maybe it will help you.

There was a typo in the instructions. Calling them cleared it up for me.