Search results

Need to know what parts to pull from the pick a-part before I go to do conversion on rear. Also what master cylinder will I have to use? Currently I have an after market aluminum master cylinder. I currently have the front disc conversion on my 74 bronco. Any and all particulars of this install...

What is the best way to put this antenna bezel on without buggering it up when tightening?

Does anyone have the information or website for a vendor in Arizona selling Dana 20’s and other bronco related stuff. I’m looking for a rebuilt Dana 20 j shift style

Looking for proper hardware to mount this mirror to doors (1974) any help appreciated

I have a 74 with automatic C-4 I’ve noticed last couple time taking it out (while cold and been sitting and backing it out of garage) when I start it up and put in gear reverse will work but I’ve had it when I put in drive it engages then drops off. The trans completely slips out for about 10-15...

Hello, Looking to install a stearing stabilizer is there anything i need to be aware of before I install? FYI It’s a 74 bronco with a toms offroad 2.5” lift

Hello, Installed new Aluminum master cylinder, bench bled it. Installed, I do have aftermarket front discs (power) installed. Bled all 4 wheels brakes still very crappy and spongy, will do some more today. maybe I may have over looked something any pointers appreciated.

When there is cracks in the pad on the shoe facing forward side only what do you suppose causes this?

See pics. What is this black boot that came with master cylinder? Use it or no use it? What is it? Thanks

Question. Just recieved new M.C. The existing hoses have…. 7/16-20 will need stepped down to 3/8-24 9/16-18 will need stepped down to 3/8-24 . Can I add step down fitting on the end to make hoses fit. or does it have to be a direct fit?

Back ground: installed power disc on front end from wild horses probably 18 years ago. I have two issues going on when braking it pulls to the right pretty hard also both calipers after you shut bronco off Jack up front end you should be able to spin the front tire freely correct? Mine nope...

Hard to find a shop that does classic 4x4. Background info. It’s a 74 with Tom’s off road 2.5” lift kit with 33” tires Dana 44 front diff aftermarket front disc brakes. So attempting to go it alone and fix myself. Found several videos on your tube but very general and not enough info. I do have...

I’m planning on fabricating a bracket to mount onto the transfer case to attach to my floor Jack so I can remove/ install more easily. Any suggestions would be appreciated. I’m trying to figure out the Angel it sits at. If anyone know please comment thanks.

I have installed a power brake front disc conversion system since 2006 from wild horses. I’ve replaced the master cylinder once since then same reason “seapage”. Vehicle does sit a lot. Ever since I’ve owned it the master cylinder “seaps break fluid” breaks work decent nothing spongey about...

Recently added a 2.5” lift kit (Tom’s offroad) need info on how to set up and adjust E-brake cables to make them functional again.

Been putting my Bronk together and got it running last couple of years. Sent out my gauges cluster had it refurbished. I also had the the dash board “powder coated” front and back, wondering if this is the issue? I can get the dash lights to work speedometer works I just can’t get the fuel gauge...

Wondering how to adjust and set up emergency brake cables newly installed. I have stock drums in rear so I assume someone on here should be able to point me in the right direction thanks

Question: I've been having issues with cylinder#4 intermittently firing I've replaced wires and cap and rotor now I get "NO"firing on that cylinder! Is this a distributor issue or is the up graded magnetic pick up failed or failing?

I’m looking to up grade the tires on my 74 bronco currently I have 35” tires, old and flat spots. I have stock gears and want to get smaller tires. I just put on a Tom’s offroad 2.5” lift kit. What are a good size tire that’s good for the stock gearing? I’m looking at 31” or 32” maybe 33”. I’m...

Recently installed at lift kit don’t need old track bar off of a 1974 bronco in north Las Vegas area. If interested hmu if in the area can pick up for free if not. Will have to pay for shipping