Search results

Hello all, I got my Warn Winch VR Evo 10S remote out of my glove box today to reel out some winch cable. The remote wouldn't work, it is a wireless and wired dual-operation unit. I changed the batteries and still nothing, hooked up the cable and it worked OK. Checked the internet for other...

I decided to build my own tire carrier for my rear bumper since I couldn't find any pre-made ones that would work for me. It is nothing special on design, in fact I copied a lot of the design features I saw on Classic Broncos member's rigs. I sourced the latch and the predrilled spare tire mount...

I'm just finishing the complete rebuild of a NP435, and in the process of setting the input shaft endplay. My problem is my new 3-4 Synchros keep sticking to my new outer hard steel plates, when I am shifting the trans by hand. This locks up the trans until I tap the outer plate loose. Is this a...

New set of Wildhorse's Transfer Case Mounts #8566, plus 4 Grade 8 washers. $35 delivered.

I have a used, T Style Transfer case Twin Stick Shifter, with Billet Aluminum shift knobs for sale. The shift rods have been bent slightly and the front drive shift rod has been shortened. The front drive shift knob has been modified to set in place with a lock screw onto the shortened shift...

2 Sets of fender mount clamp on tow mirrors. These fit the Early Bronco Fenders and wheel wells perfectly. Great if you do need to tow with your Bronco occasionally. $20 per set (Your Choice) plus shipping.

Rear extended length driveshaft for a lifted Bronco. 35" working length. 35 3/4" extended, 34 3/8" collapsed. Includes new U Joint for rear axle end. CV Joint in good condition, no vibrations. Includes hardware, but it is missing the dust cover (Shown in Picture #3) $75 plus shipping.

For Sale $150, Rebuilt Rear Output Assembly for a Dana 20. New Koyo Bearings, Races, and Seals from WH. New Gasket is included. Assembly is set up with 6 inch-pounds of preload, which is said to help with Gear Pop-Out issues.

I have 2 Dana 20 J Shift Front Output Shafts for Sale. These are desirable for improving the front output shaft on the T Style case during a rebuild. The first one is in excellent shape and includes the thrust washer and the spacer needed. $75 The second one is in good condition, but does...

I've done a search but I can't find a definitive answer on this question. Is there a difference in length between the I6 and V8 manual transmission Spud Shafts? I know the V8 with a C4 uses a unique 7 3/8" long Spud Shaft; however, the standard shift one is about ( ? 8"?) in length. Wildhorses...

C4 Spud Shaft 7 3/8" OAL and Bearing Retainer with used bearing and seal, both used OEM pieces. The Bearing Retainer is steel, not aluminum. Not for the manual transmission. $150 plus shipping.

For Sale Dana 30 axle, complete hub to hub, 4:56 Gears, Power-Loc Posi traction, includes Warn Premium Hubs. All in good condition, except minor leak from passenger side inner oil seal. Prefer local pickup only.

Tailgate parts. Hinges and Supports. $50. plus shipping. New price, $50 - shipping included!

My exhaust system on my Bronco was put on in 1980 so I thought I would replace the somewhat rusted Turbo mufflers with some Flowmaster Super 44 mufflers to give my Bronco more of a muscle car sound, which my 351C Engine deserved! Then it started, I decided I could add an H pipe pretty easy and...

I ordered a manual gas valve from Tom's Bronco Parts in mid June, but unfortunately they were out of stock and had to backorder my order. I got notification end of last week that it had been shipped to me via Fed Ex 2-day express, great, they shipped it express to make up for the lateness of the...

I need to know the measurement of how far the spud shaft/gear of the trans adapter extends into the transfer case. I'm wanting to add an exhaust crossover pipe behind the transfer case and want to place it back far enough so I can still pull the transfer case rearward and drop it out of the...

I have a OEM hood loop off of a 66 model, $20 delivered.

I have a set of Flexible Braided Stainless Brake Lines for the Master Cylinder I purchased from WildHorses for $89.99 + freight and I used them less than 3 months before I had to build new longer ones when I upgraded to Hydroboost System. They include the 5 fittings Wildhorses included in their...

Does anyone have a source for the Steering Column interior rubber trim "Grommet" used on the 1966/67 Bronco's? Didn't see anything listed on our Bronco Vendor sites. Mine is beyond brittle. Thanks.

Well after having my converted 1970 Ford Torino OEM Power Steering Pump and Brake Booster on my Bronco for 40 years, I decided it was time for a Hydroboost and Saginaw style pump update. During my initial conversion, I had also used the Torino Booster offset bracket on my Bronco to get my...