Duffy's 77 Build Thread- Restomod, daily, re-uncut

duffymahoney · Mar 28, 2017

This was a fun / awful project. 77 gas filler necks. I went through 2 of each to get ones that weren't rusty or too pitted. Zinc plated then clear coated. The stupid rubber grommet is the worst. If anyone has ever pulled a 77 apart will know my pain.

duffymahoney · Apr 2, 2017

Ever had one of those projects you would have guessed would take 1 hour max and then end up being 2 trips to the store and half of a Sunday. That's my gas tanks. Frick they sucked. Oh well.

luckieschmuck · Apr 2, 2017

Loving the amount of love and care you're giving this project. A true enthusiast would appreciate your efforts. Well done, looks great

Sent from my iPhone using Tapatalk

duffymahoney · Apr 3, 2017

luckieschmuck said:
Loving the amount of love and care you're giving this project. A true enthusiast would appreciate your efforts. Well done, looks great

Sent from my iPhone using Tapatalk

Thanks! I am still having fun, which is all that really matters. My goal is for it to last another 40 years and look good doing it

Since I am re spraying my bronco, I can't finish the wiring. I put this steel bar on to hopefully get the engine bay 100% done, rear and also transmission controller, amps etc... I can just zip tie the harness to it, so it's in the same basic spot.

doghows72 · Apr 3, 2017

That's a shame to cover up that beautiful satin finish, but I understand your pain.
When is the big respray day??

duffymahoney · Apr 3, 2017

doghows72 said:
That's a shame to cover up that beautiful satin finish, but I understand your pain.
When is the big respray day??

Solid question that I don't know the answer to. Hard top still isn't done

duffymahoney · Apr 7, 2017

Amp wiring is just about done. The wetsounds wetwire is sure nice stuff

I know the hood bumpers are on backwards

duffymahoney · Apr 8, 2017

Stereo is alive and rocking. 8" JL sub sounds great. Not really bass but nice full clean sound. Wiring is clean but boy is everything tight. I really like the access this location gives me to the amp.

Swerve · Apr 10, 2017

duffymahoney said:
Amp wiring is just about done. The wetsounds wetwire is sure nice stuff

I know the hood bumpers are on backwards

Very clean, nicely done!

duffymahoney · Apr 10, 2017

I've been wiring for like the past week, so nothing fun to post. But I'm getting closer to starting it!

I built a ground strap to the frame out of left over tinned copper wet wire. It's amazing how dirty my bronco gets just sitting in my garage.

duffymahoney · Apr 18, 2017

Well two steps forward and one step back. I had my shock mounts mounted wrong originally. I gave up trying to find a crazy short shock to fit and cut off and tig welded on ruff stuff mounts. Gone is my perfectly powder coated axles

Oh well, I am glad we did it.

Now to paint it and match as best as possible.

duffymahoney · Apr 19, 2017

Wow, I have some talented friends. My core came with radiator brackets that were off by around a 1/2 inch. I attempted to just weld and fix the stainless ones, but they have always bugged me, and I really didn't want to take apart my front end to grind, weld and paint again. So they are going to mill these out of aluminum. Super cool 3D print to test. Just a little more fitment and they will be perfect.

crutch · Apr 19, 2017

Wow, these are sweet! I have this same problem right now!

Sent from my iPhone using Tapatalk

duffymahoney · Apr 19, 2017

crutch said:
Wow, these are sweet! I have this same problem right now!

Sent from my iPhone using Tapatalk

How far off are yours?

crutch · Apr 19, 2017

duffymahoney said:
How far off are yours?

I was able to force the stock mounts on but the radiator doesn't fully seat and I was never happy with it. I just haven't spent time on it given other priorities like getting my new engine installed.

duffymahoney · Apr 20, 2017

Well, new shock mounts work and look great. Lots of travel now. I am hoping for 6.5" up and 4.5-5.5 down.

toddz69 · Apr 20, 2017

duffymahoney said:
Well, new shock mounts work and look great. Lots of travel now. I am hoping for 6.5" up and 4.5-5.5 down.

You'll quickly forget that it's painted and not powder coated.

Todd Z.

duffymahoney · Apr 21, 2017

Now these I'm excited about.

All billet. Centers were turned on a lathe. I think they look mostly stock with an upgrade.

Rox Crusher · Apr 21, 2017

nicely done !

Vin218 · Apr 21, 2017

Those knobs look awesome, thats something one of the vendors should be selling. I have the all black billet ones but yours look way better

Duffy's 77 Build Thread- Restomod, daily, re-uncut

Bronco Guru

Attachments

Bronco Guru

Attachments

Full Member

Bronco Guru

Attachments

Bronco Guru

Bronco Guru

Bronco Guru

Attachments

Bronco Guru

Attachments

Sr. Member

Bronco Guru

Attachments

Bronco Guru

Attachments

Bronco Guru

Attachments

Full Member

Bronco Guru

Full Member

Bronco Guru

Attachments

Bronco Guru

Bronco Guru

Attachments

Bronco Guru

Sr. Member

Similar threads