Painless is using my Rig!!!!

ShortBus · Apr 20, 2008

The guys from Painless are getting my Bronco this week to develope a new harness for the Early Bronco. I can't tell you how excited I am about it. I have a 71' Sport. My fuse block is in the glove box. They let me know they are reengineering thier current harness based on feedback from all of you! You can veiw my build thread to see the detail associated with my 71'. If you see anything missing that you feel is important, then post it here! I will happily share any photos and information about the new harness after the install!

dbruce9035 · Apr 20, 2008

where are the painless people located. i from Texas too, they could have used mine. I'm happy for you. really, you believe me don't you.%)

ShortBus · Apr 20, 2008

They are in Fort Worth! Trust me, when I say that I feel lucky! I should not get too ahead of myself, they haven't taken my truck yet

. They could easily change their mind and take yours!

mp · Apr 20, 2008

Bastards didn't even take the time to send me a reply email and turn down my self nominated rig.....

ShortBus · Apr 20, 2008

Sounds like they got a lot of response to this! I think that they chose mine because I am the closest one to them with a driving rig.

dbruce9035 · Apr 20, 2008

ShortBus said:
They are in Fort Worth! Trust me, when I say that I feel lucky! I should not get too ahead of myself, they haven't taken my truck yet . They could easily change their mind and take yours!

hmmmmmmmmmmm.........where did i put that e-mail address from Jeff? oh nothing, I'm just thinking out loud.

Dan76 · Apr 20, 2008

Wow that sounds like a pretty sweet deal for you, congratulations!

71BroncoBoy · Apr 20, 2008

That sounds awesome, please post when they take it and when they plan to release the new wiring harness if you can find that out!!! Thanks

-E

Madgyver · Apr 20, 2008

They can send out the 1st prototype to me in Hawaii once it's made and I'll test it and make sure the instructions and wiring is all good......

I believe Jeff, one of their reps should be seeing this.... Hey, it's me Honorio from Honolulu..... ;D

onecool34rat · Apr 21, 2008

Painless Harness

Gentlemen,

I can see we've got ya'll stirred up a bit. The post about how close the '71 Bronco is, is what determined who's Bronco we picked. We won't change our mind and we will be picking it up this week.

We are looking forward to having a harness all of you can be happy with.

There will be more on this subject as the project progresses. When we have a question for you guys, I'll post a picture and the question.

Cheers,
Jeff Abbott
Painless Engineer

Revelation · Apr 21, 2008

onecool34rat said:
Gentlemen,

I can see we've got ya'll stirred up a bit. The post about how close the '71 Bronco is, is what determined who's Bronco we picked. We won't change our mind and we will be picking it up this week.

We are looking forward to having a harness all of you can be happy with.

There will be more on this subject as the project progresses. When we have a question for you guys, I'll post a picture and the question.

Cheers,
Jeff Abbott
Painless Engineer

Gee Thanks, now you took all the guess work out of what Harness I want to go with. It is great to see another vendor that proves they want what is best for the consumer. Kudo's to Painless!!

sprdv1 · Apr 21, 2008

Congrats & thanks to Jeff Abbott for the response... How cool is that, looking out for their customer.. Right on.. ;D

NYLES · Apr 21, 2008

And I had a challenge for em....ready to go unwired....oh well! least somebody caught a break in the madness!

77broncoguy · Apr 21, 2008

Man, just my luck. I just bought one of the 14 circuit harnesses!!! Any chance they'd take it unopened towards the new one when it comes out? I probably won't be installing until this winter at best. Darn it!

77BroncoWag · Apr 21, 2008

14 ciruit? Is that the really old one? Seabiscuit68 just installed mine a few months ago (20 circuit) he'd be one to ask about the weird stuff. I know that there were some issues on how painless wanted the wire run and to cut another hole (rather than using the oem holes) to run the wires.

77broncoguy · Apr 21, 2008

I just opened the box. The box says 14 circuit Bronco, but it appears that it is a 20 circuit.

deltarat · Apr 21, 2008

onecool34rat said:
Gentlemen,

I can see we've got ya'll stirred up a bit. The post about how close the '71 Bronco is, is what determined who's Bronco we picked. We won't change our mind and we will be picking it up this week.

We are looking forward to having a harness all of you can be happy with.

There will be more on this subject as the project progresses. When we have a question for you guys, I'll post a picture and the question.

Cheers,
Jeff Abbott
Painless Engineer

Hope you have it worked out by winter.

Crewwzin · Apr 21, 2008

This excites me. I'll be in the market for a harness about the time they get done with engineering it....hopefully.

Kudos to Jeff and Painless for looking out for us.

Skiddy · Apr 21, 2008

Kudos to painless thats great, I have a painless harness in mine installed by the po and no problems

Broncoman · Apr 21, 2008

So they are only focusing on the later crowd? I would like to see another kit for the early years since the harness enters the engine compartment different on the early years as compared to the later one.

I mean everyone has a kit for the later broncos. By being unique you might sell more.

Painless is using my Rig!!!!

Sr. Member

Attachments

Jr. Member

Sr. Member

Bronco Guru

Sr. Member

Jr. Member

Sr. Member

Jr. Member

Bronco Madman

Bronco Guru

REBEL

Bronco Guru

Full Member

Bronco Guru

Full Member

Bronco Guru

Bronco Guru

Bronco Guru

Bronco Guru

Similar threads