Ok Here goes on the project that should not be done ;D I have a 1970 Bronco that i am going to strip down and put a mildly built 460 in just to have something different and keep it drivable and NOT cut up. Here are some pictures of what i started with and of me ripping it down to the bare frame. Ill be getting the frame back from being blasted sometime this week or the begining of next week. I am going to be running F-150 coils and L&L Motor Mounts for a full size a C6 and 205 tranny and transfer case, and illl be building as much of the fabrication i can myself. I dont expect to be done with the whole project tommoro, or next week, or next year for all that matters, for one because i pretty much have to find (and afford) a whole nother body cause the one that came off of it was way worse than the pics show.
Pullin the old 302. The most reliable motor i own
Down to the bare frame
http://images.photos1.walmart.com/232323232fp43333>nu=3253>28;>57:>WSNRCG=33499;4;84324nu0mrj
Pullin the old 302. The most reliable motor i own
Down to the bare frame
http://images.photos1.walmart.com/232323232fp43333>nu=3253>28;>57:>WSNRCG=33499;4;84324nu0mrj
