City:
Houston
Price: $ 10000
Price: $ 10000
Up for sale:
1971 Bronco Project car with Hardtop
Comes with an original 302 ci, Dana 44 front diff; Ford 9" rear diff and 4 speed manual trans. All numbers matching.
Body is mostly straight, but there is some significant cancer. Front floors and hinge/striker posts will all need to be replaced, but good news is I have the replacements as well. Bottom of tailgate is shot as well. Frame is fairly solid, but one of the front bumper horns has been cut and welded on. Previous owner had glued carpet to the floor which left a lot of residue behind.
Miles are unknown, but the motor spins freely. I have the intake and throttle body of a 90's Fox Body Mustang for EFI conversion (no computer). Comes with all body panels. One door has a patch panel on it and one fender is a little boogered up on one corner.
Car is mostly disassembled and in boxes in the cab. Dash is there but most of the components for the dash are trash. All seat frames are there, but no upholstery. Have all of the glass except for one hardtop side pieces. 5 original steel wheels. Had to put some cheap car tires on it to move it around the garage. Tire dollies come with sale. Comes with stock glovebox door with VIN. Comes with clean blue Texas title.
Things I know are missing - Battery, fuel pump; steering column; bumpers and master cylinder.
Thought I would have time to take this on, but life got in the way. Asking $10K or best offer.
1971 Bronco Project car with Hardtop
Comes with an original 302 ci, Dana 44 front diff; Ford 9" rear diff and 4 speed manual trans. All numbers matching.
Body is mostly straight, but there is some significant cancer. Front floors and hinge/striker posts will all need to be replaced, but good news is I have the replacements as well. Bottom of tailgate is shot as well. Frame is fairly solid, but one of the front bumper horns has been cut and welded on. Previous owner had glued carpet to the floor which left a lot of residue behind.
Miles are unknown, but the motor spins freely. I have the intake and throttle body of a 90's Fox Body Mustang for EFI conversion (no computer). Comes with all body panels. One door has a patch panel on it and one fender is a little boogered up on one corner.
Car is mostly disassembled and in boxes in the cab. Dash is there but most of the components for the dash are trash. All seat frames are there, but no upholstery. Have all of the glass except for one hardtop side pieces. 5 original steel wheels. Had to put some cheap car tires on it to move it around the garage. Tire dollies come with sale. Comes with stock glovebox door with VIN. Comes with clean blue Texas title.
Things I know are missing - Battery, fuel pump; steering column; bumpers and master cylinder.
Thought I would have time to take this on, but life got in the way. Asking $10K or best offer.
Attachments
Last edited: