- Joined
- Dec 4, 2010
- Messages
- 961
Spindle
It's a trailer spindle. Company I got if from is listed on the sheet. They supply a sleeve to weld in first and then the spindle slides in that sleeve. It can be just tacked to the sleeve, or welded full in. You might be able to save a few $$ sourcing it local, not sure.
Good luck and look over that thread by Mark. I used the "gate latch" idea that he had worked out. Let me know if you need more info on the spindle or latches. Be happy to help.
LOOKS AWESOME, THANKS, I will definitely borrow from your design. is that a front spindle of some kind?? I like the bearing idea!!
It's a trailer spindle. Company I got if from is listed on the sheet. They supply a sleeve to weld in first and then the spindle slides in that sleeve. It can be just tacked to the sleeve, or welded full in. You might be able to save a few $$ sourcing it local, not sure.
Good luck and look over that thread by Mark. I used the "gate latch" idea that he had worked out. Let me know if you need more info on the spindle or latches. Be happy to help.