• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Headlight Adjusting Screws

Desert Thrasher

Bronco Guru
Joined
Jul 14, 2001
Messages
2,353
Most parts stores carry those in the "Help" areas with other little generic parts. Of course being for a Ford, you will most likely have to go to a few stores to get enough to work. What I did was bought a few that looked close to what I needed and mix matched until I had a complete set. Also ended up using some speed nuts because those plastic pieces are junk.
 

Bronco Junkie

So Cal Broncos
Joined
Feb 29, 2012
Messages
3,233
I just looked this weekend for some at Auto Zone and O'Reilly's and could not find them. The ones in the Help section have too small of a screw. I ordered some from WIld Horses.
 

Pat B

Full Member
Joined
Aug 21, 2012
Messages
154
Good choice. When I bought my new grill from Toms, I didn't think about the plastic nuts. with a sigh oh relief I found 'em on the web site
 
Top