Older style Duff 4-link bent lower arm bushings.

[Madgyver]

Anyone know the size and/or replacements of these bushings on the older style Duff 4-link with bent lower arms?

 

[Yeller]

Have you pulled an arm down and measured? I’m sure they are not an odd size. I’m assuming you called to see if there was any issues info available

 

[Madgyver]

Have you pulled an arm down and measured? I’m sure they are not an odd size. I’m assuming you called to see if there was any issues info available

trying to get answers before taking it apart. I am assuming others have run into these issues. If there are any issues, please post.

I noticed that Duff no longer sell this 4-link kit and went with a straight lower link with hiem joints on both ends.

can't find a part number for the replacement bushings. I hope it is a common size bushing.

 

[Madgyver]

i need help with this. Duff techs can't find it..

 

[Madgyver]

anyone?...............................

 

[bronconut73]

Did you reach out to Mike on Facebook?

They usually have "a fix" for older Duff stuff.
They may have a retrofit arm ($) from the new kit that may work.

 

[Madgyver]

I'm surprised that no one else runs these older style bent lower arms.