Uncuts and Lifts

[Mill KNOB]

Here is my 66 with 30x9.50x15 would like to go with 31's also.
I have a 2.5 WH's suspension lift and a 1" WH's bodylift.
The pic with the top off is a 2.5" suspension with no bodylift.
Both with stock rims.

I love your bronco... The set up you have is awesome. I am in love.. ;D

 

[builtfords]

Pics are a few years old but when we were sporting a 3" WH lift and 31" x 10.50 Goodyears

They rubbed the front radius arms at full lock, the rears cleared when articulating (thx Steve for the pic!)

The 10.50 width performed better in the dunes than the current 9.50's (thx Dusty for the pic!)

 

[BajaFresh75]

uncut

1975 Denver, 2.5 lift front 3.5 lift rear for a little rake. 33x9.50x15 BFG's on 7x15 slots. Rubs a little off road, on the street no problems. No body lift.

 

[Ohio Bronco 21]

realgreen, that is one nice bronco, cool pics.

 

[72Quarterhorse]

James duff 3 1/2'' S/lift with no B/L 31x10.50 on 10x15 rims.

 

[Casey835]

I like these. Does anyone know the owners? would like to know the lifts and tire sizes.

 

[kyle]

I don't know the owner of the yellow one, but I have seen it in person and it was wearing about a 6" lift and I think those were 35" boggers.

 

[75 Ranger]

I will be going with the 3.5" suspension lift with 33x10.5 15 on my uncut. Should look good with the M/T Alcoa Challengers I have sitting in my garage.

 

[Ohio Bronco 21]

Those Alcoa wheels are nice and hard to come by.
I was planning on a 2.5 suspension lift and 1 inch body lift on 31's but may bump the suspension lift up 1 more inch.

 

[75 Ranger]

I was planning on a 2.5 suspension lift and 1 inch body lift on 31's but may bump the suspension lift up 1 more inch.

Yeah, I'm not sure about the benefits of a 1" body lift vs. an additional inch of suspension lift. I'm tossed between Tom's (#9) and WH (#7) on the suspension lift kit.