• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Swaybars on!

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
Yes, those are factory. The mounts are made better than any of the aftermarket I've seen. The bushing under the diff housing gets an oil bath everytime you pull the oil filter. That makes the rubber soft and the whole thing becomes useless.
 

Explorer

Bronco Guru
Joined
Mar 2, 2008
Messages
4,390
Loc.
Raphine, Virginia
Yes, those are factory. The mounts are made better than any of the aftermarket I've seen. The bushing under the diff housing gets an oil bath everytime you pull the oil filter. That makes the rubber soft and the whole thing becomes useless.
That is a shame. I was considering putting a set on my "76" as it's mainly street driven. I helped my son put on a few on jeep's before he was reborn and they were quality stuff, easy disconnect for offroad.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
That is a shame. I was considering putting a set on my "76" as it's mainly street driven. I helped my son put on a few on jeep's before he was reborn and they were quality stuff, easy disconnect for offroad.

If you have all the origonal hardware, Jeffs sells replacement poly bushings for it. Poly should hold up to the oil bath better than rubber.
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
Big O, wild child makes an electric sway bar that you supposedly can disconnect in the cab. I beleive Chuck at BC broncos won one at a raffle at one of the runs but he hadn't installed it last time I talked to him. I wouldn't buy one anyway, all of the wild child products I have purchased were made half ass and I have e-mailed till my fingers hurt about the sway bar and I have yet to get one returned. Piss on them, I will make my own.

Ben
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
I wouldn't buy one anyway, all of the wild child products I have purchased were made half ass and I have e-mailed till my fingers hurt about the sway bar and I have yet to get one returned. Piss on them, I will make my own.

Ben

Not to mension they want $900 for it!!!!!:eek: :eek: :eek:
 

ugly74

Bronco abuser
Joined
Apr 17, 2006
Messages
2,856
Loc.
Colorado
a 6" x 24" piece of cardboard, folded into a V lengthwise, one end under the filter, the other end over a drain pan, works wonders for not soaking everything when pulling the oil filter.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
a 6" x 24" piece of cardboard, folded into a V lengthwise, one end under the filter, the other end over a drain pan, works wonders for not soaking everything when pulling the oil filter.

Good tip!;)
That's always been the worse thing about servicing one of these. I havn't been able to do it without making a giant mess.
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
A sway bar does not limit suspension travel but does severally limit articulation.
I did win the wildchild ele. sway bay. I think it will fit a stockish EB fine but I want to put it on my racer so am still working out how to get it to work with the 15" of travel and the fuel cell and the 12" longer than stock leafs and the triple pass shocks and some other stuff that is in the way but if I can get it to work on the racer I am sure it will make for a great high speed ride. I have a little trouble keeping the racer between the cactus at around 80:)
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
Chuck do know what the story is with Wild Child manufacturing these? I see them advertised but can't ever seem to get Wild Child to talk about ordering? I have essentially the hell with it but I am curious. Pretty piss pour way to do business.

Ben
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
I am not sure, I call Sam when I want and most of the time I talk to him. If you want to talk to him let me know and we can exchange numbers to make sure you have the same one I have or I can have him call you, just let me know.
 
Top