Transfer Case Fill Plug - Dana 20

[GrillMaster]

Where do you fill the transfer case on a Dana 20? Anyone have pictures?

 

[BlackHorse]

You should see the fill plug on the back of the case. It's 4-5" from the bottom of the case.

 

[76 bronco J]

>>>>>>>>>>>>>>>>

 

[bronco italiano]

That's concerning. BI

 

[22213evl]

76broncoj thats just way to clean under there. LOL

 

[Madgyver]

76broncoj thats just way to clean under there. LOL

I noticed that also......

 

[GrillMaster]

got it. New juice! Thanks!

 

[TOOL]

what oil are you using?

 

[GrillMaster]

standard gear oil. think it's 80-90 or 75-90. Which is better?

 

[jedblake]

My local drive line shop highly reccomends the 80-90 and change once a year if you tow a boat, pass water crossings or mud.
I used two of the Valvoline bottles they sell at Autozone; the shop did not have a oil manufacture prefernce.

 

[GrillMaster]

It was Valvoline 80/90 needed three jugs (think one gallon each) for 4 speed trans, both diffs and transfer case. Have about a half a jug leftover. Was real easy with pump. What would be cool is drain plugs on the diffs. But I also dont want to give up any clearance.

 

[22213evl]

It was Valvoline 80/90 needed three jugs (think one gallon each) for 4 speed trans, both diffs and transfer case. Have about a half a jug leftover. Was real easy with pump. What would be cool is drain plugs on the diffs. But I also dont want to give up any clearance.

TRY THESE GUYS FOR THE DRAIN PLUGS. oops sorry about the caps wasn't looking at the screen


http://www.greatlakeoffroad.com/diff.html

 

[TOOL]

+1 that's what i'm getting