• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rocker Moulding Clips???

pharmin06

Full Member
Joined
Jan 4, 2006
Messages
221
Anyone know who sells the clips for installing the factory rocker mouldings?
Thanks for any help;D
 

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
Try Obsolete Ford Parts at http://www.classicautoparts.com/
They have clips for all sortrs of rocker moldings. They use to have the rocker molding too.

If that does not work, the clips are a fairly standard item, so one of the trim supply vendors should have them.

Let us know if you find them. I will be looking for a set shortly, too.
 
OP
OP
pharmin06

pharmin06

Full Member
Joined
Jan 4, 2006
Messages
221
Try Obsolete Ford Parts at http://www.classicautoparts.com/
They have clips for all sortrs of rocker moldings. They use to have the rocker molding too.

If that does not work, the clips are a fairly standard item, so one of the trim supply vendors should have them.

Let us know if you find them. I will be looking for a set shortly, too.

Thanks for the tip but no luck...
 
OP
OP
pharmin06

pharmin06

Full Member
Joined
Jan 4, 2006
Messages
221
I have one NOS set, (5) plastic clips(pop rivet on) and (2) wing clips (bolt-on).
The part number on the plastic clips is C6TB-9610182, ive searched but is there anyway to cross reference the number???
 

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,151
pharmin,
Do you have a pic of these clips? I will check and see if I have anythat I have pulled off in the past. I try and keep stuff like that around in my storage junk. I know I pulled a set of old rocker trim off a few years ago. I might be able to check with my local auto paint and trim store too....they get a lot of neet stuff from from their distributor like grill trim clips, beltline molding clips that I use on the Bronco.

Thanks,

Blue71
 

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
Hmmmm, I haven't gone done that path yet, but now you have me worrying.
O.K., first see if you can come up with some sort of cross reference. In the mean time, try
http://www.restorationspecialties.com/

They have clips that look pretty much ike the ones I just removed for the rocker moulding. It could be just a matter of measuring and finding one in their catalog.
 
OP
OP
pharmin06

pharmin06

Full Member
Joined
Jan 4, 2006
Messages
221
Im going to take a pic of the set I have(one side) and take some measurements and ill post them.....
 
Top