• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Car lift show off

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
Just wanted to show off my lift that I got working today. Life should be easier now. I need to build a covering over it. It is a 3-phase from the Shreveport GM plant that took a little while before I figured out how to wire it for single phase. I bought a static converter and it runs great. 500 bucks for the lift and a 75 dollar converter. I now see all types of stuff I want to clean and paint.
 

Attachments

  • lift 002.JPG
    lift 002.JPG
    138.7 KB · Views: 180
  • lift 003.JPG
    lift 003.JPG
    145.2 KB · Views: 247
  • lift 005.JPG
    lift 005.JPG
    142.1 KB · Views: 198

robofig

Sr. Member
Joined
Jan 21, 2008
Messages
452
Tell you what. Be that it is from a GM plant it will never work out for you and your bronco. I'll take it off your hands, kick you a few bucks for beer, and that way your bronco won't be tramatised.
 
OP
OP
rjrobin2002

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
Since I have Chevy front axle shafts and brakes and I am fixing to do a chevy heater fan motor I think it will work OK. Plus I got some of my tax money that the government gave GM back.
 

borg

Jr. Member
Joined
Feb 22, 2007
Messages
93
$575 for the lift and $10k for the shop that will go around it....

Nice deal on the lift though, after getting a lift for my bikes I can't imagine going back to crawling around on the floor.

Steve
 

Mill KNOB

Bronco Guru
Joined
Jun 25, 2007
Messages
1,684
Loc.
Rock Hill, SC
The only thing I would like to have is a big nice tool box. I would have never thought about a lift. Very nice. You are a luck man.... Plus the hole dog thing is cool to.. They do look a like.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
I like your lift ... I like the picture of your Dad ..I guess it's your Dad .. It's amazing how much that picture will mean after he's gone..Old Timers are hard to replace..I didn't know you could swap over a 3 phase but I'm no electrician.
...Is that on a new slab or and old one .. How thick.....
....
......And I think I'd go get a new license plate I don't care for that no. on a Bronco
 
OP
OP
rjrobin2002

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
I like your lift ... I like the picture of your Dad ..I guess it's your Dad .. It's amazing how much that picture will mean after he's gone..Old Timers are hard to replace..I didn't know you could swap over a 3 phase but I'm no electrician.
...Is that on a new slab or and old one .. How thick.....
....
......And I think I'd go get a new license plate I don't care for that no. on a Bronco

Thats dad and grandpa looking around. Thanks and it is a slab I poured about 1 yr ago, 6" thick with rebar and concrete wire. I built it heavy to be able to close in eventualy.
 
Top