- Joined
- May 18, 2004
- Messages
- 5,283
Started to load yesterday for our trip out to KOH next week.
We got the three support rigs loaded and some of the tools, equipment, fuel and water barrels, cooler, clothes and gear for the 10 crew members who are flying out, etc.
BroncoLou's race rig is getting the new graphics installed this week and will be loaded on back on Thursday.
We could not fit Brian's Polaris RZR sport behind the cab of the Volvo as I had hoped (damn, that was gonna be by ride to get around and it was sweet looking, had an enclosed cab and all!), so I have a Yamaha Raptor 660 I will be throwing behind the cab as my pit vehicle.
It took about 6 hours to get all our junk sorted, loaded and secured. It made for a long day out in the 20 degree temps! It was cold enough that the diesel in the Volvo geled since we had not added fuel since the summer when we last used it. I had to get some fuel additives and then wrapped a skirt around the rig with a tarp and blew heat under it for a few hours with a torpedo heater. Got it fired up and then went and topped off with some winterized fuel.
I still have all my tools and gear to load as well as a couple parts for some folks I will be meeting out there. Still a good bit of work to be done this week! Lou has been working the hell out of us to get him out there!
:-X ;D
I plan to pull out of PA on Friday night and will likely take the PA turpike to I-70 then to I-44 till I catch I-40 in Oaklahoma City, then run 40 out.
If you see us along the route, give us a wave!
We're looking forward to meeting those of you who are coming out to the race. Be sure to stop by the #231 pits to say hello!
Go Lou!!!!!!
We got the three support rigs loaded and some of the tools, equipment, fuel and water barrels, cooler, clothes and gear for the 10 crew members who are flying out, etc.
BroncoLou's race rig is getting the new graphics installed this week and will be loaded on back on Thursday.
We could not fit Brian's Polaris RZR sport behind the cab of the Volvo as I had hoped (damn, that was gonna be by ride to get around and it was sweet looking, had an enclosed cab and all!), so I have a Yamaha Raptor 660 I will be throwing behind the cab as my pit vehicle.
It took about 6 hours to get all our junk sorted, loaded and secured. It made for a long day out in the 20 degree temps! It was cold enough that the diesel in the Volvo geled since we had not added fuel since the summer when we last used it. I had to get some fuel additives and then wrapped a skirt around the rig with a tarp and blew heat under it for a few hours with a torpedo heater. Got it fired up and then went and topped off with some winterized fuel.
I still have all my tools and gear to load as well as a couple parts for some folks I will be meeting out there. Still a good bit of work to be done this week! Lou has been working the hell out of us to get him out there!
I plan to pull out of PA on Friday night and will likely take the PA turpike to I-70 then to I-44 till I catch I-40 in Oaklahoma City, then run 40 out.
If you see us along the route, give us a wave!
We're looking forward to meeting those of you who are coming out to the race. Be sure to stop by the #231 pits to say hello!
Go Lou!!!!!!











