• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rampage top and roadster inserts

BroncoDesign

Contributor
Sr. Member
Joined
May 6, 2009
Messages
437
Loc.
USA
Hey All-
I have a customer in Oregon who has installed my inserts and is using a RAMPAGE soft top. The front, bottom, corner of the top (if that makes any sense), extends into the door opening to seal against the lower rear part of the window frame.

He's asking how to secure the bottom leg of the door seal frame without drilling into the insert.

I met a customer at MEBR this year who took me over to show me how he had solved the problem with an extension piece which looked good and worked well. Unfortunately, I didn't get pictures to share with others.

If you're out there or you've dealt with it, can you post some pics.

Heres a picture I just stole of the offending rod from John Johns Rampage thread-



Thanks, Mike
 

Attachments

  • Rampage softtop.jpg
    Rampage softtop.jpg
    66.7 KB · Views: 132
Last edited:

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
weld the rod to the flat bar in the pic and cut to remaining rod off.
 

Attachments

  • Soft top bracket1.jpg
    Soft top bracket1.jpg
    89.7 KB · Views: 79
  • Soft top bracket2.jpg
    Soft top bracket2.jpg
    137.5 KB · Views: 112

iwlbcnu

Contributor
Bronco Guru
Joined
Nov 1, 2001
Messages
3,349
I did as the top pic, but made mine step up and cut the rod shorter so that in would clear the factory door gasket or the inserts. I slotted the bolt hole to get better door/top adjustment.
 
OP
OP
BroncoDesign

BroncoDesign

Contributor
Sr. Member
Joined
May 6, 2009
Messages
437
Loc.
USA
Thanks Ransil,
I'll pas the link and pics on to Shawn. Any other variants out there? Is there a no-weld solution in case he's not a metal burner? I notice yours is the flat bar. I believe his is the rod as pictured in the photo from John John.

Maybe drill/tap the rod, put a flathead screw through the bottom of the bracket then through an undersized washer so the rod can't drop through the old hole, and into the bottom of the rod.
 
OP
OP
BroncoDesign

BroncoDesign

Contributor
Sr. Member
Joined
May 6, 2009
Messages
437
Loc.
USA
I did as the top pic, but made mine step up and cut the rod shorter so that in would clear the factory door gasket or the inserts. I slotted the bolt hole to get better door/top adjustment.

Hey CNU,
Thats what I saw at MEBR. Got any pics?
 

iwlbcnu

Contributor
Bronco Guru
Joined
Nov 1, 2001
Messages
3,349
I keep meaning to, we talked at the roundup about it, but never got back to gether.
 

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
Thanks Ransil,
I'll pas the link and pics on to Shawn. Any other variants out there? Is there a no-weld solution in case he's not a metal burner? I notice yours is the flat bar. I believe his is the rod as pictured in the photo from John John.

Maybe drill/tap the rod, put a flathead screw through the bottom of the bracket then through an undersized washer so the rod can't drop through the old hole, and into the bottom of the rod.

That pic is from an old Kayline or STC, top pretty sure there was a rod on it and I cut it off.
 

iwlbcnu

Contributor
Bronco Guru
Joined
Nov 1, 2001
Messages
3,349
only thing about welding, then it isn't easy to remove the door frame when the windows are out. Next time I do it, I will use the straight piece like in the top pic, but not drill it, then use my bent bracket with the hole. That way the rod goes thru and rests on the bottom piece. And yes i was in the hay field til 9pm and forgot to grab a pic again.
 
OP
OP
BroncoDesign

BroncoDesign

Contributor
Sr. Member
Joined
May 6, 2009
Messages
437
Loc.
USA
Thats one of the ways I was thinking about but I didn't know if the customer had access to a welder. The cut rod/ drill tap/undersized washer would be the no-weld option. Thanks for the pic!
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
I've thought about removing the insert and glassing in a nut then drilling the bracket for a bolt, that would be one less sheet metal screw to vibrate loose.
Steve
Too many things on the "Steve to do list"
 
OP
OP
BroncoDesign

BroncoDesign

Contributor
Sr. Member
Joined
May 6, 2009
Messages
437
Loc.
USA
My wifes honey do list is so long, I gave up. I told her to hire a twenty something with more muscles and less aches and pains.
 

Amac70

ME
Joined
Mar 27, 2002
Messages
3,269
shawn has welder and i think he has already finished getting it installed.
 

regshawn

Bronco Guru
Joined
Feb 23, 2006
Messages
2,597
Loc.
Portland
Here's what I did.
Steve

That is exactly what I was/am going to do, I even picked up the metal last night. Thanks for confirming my thought and supplying a photo. I have to say thanks for all the great ideas, and if this does not work the way I want I can move down the list till something works the way I want. My insert attaching point lands right under where the rod would go through, this should be the tickit, I'll try and work on it tonight. Thanks

Shawn
 
Top