Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Schematic??? Well, I've got a write-up of sorts, which is just (relevant) posts and pictures from the NorCal Bronco site, that does a decent job of documenting how to build them. Lars used Johnny Joints, and all that stuff can be bought from Poly Performance. PM me your email address and I'll send you the .doc file I've got.
Knowing Lars, I'm sure he did it in SolidWorks. You could ask him for the CAD if you really want it. They're not super complicated. As mentioned, look for the thread on norcalbroncos.com. I think the hardest parts were finding someone to bend the thick wall tubing and then figuring out his fixture to keep everything lined up when he welded it together.
Thanks for all the responses. I have a big steel table that i build temporary jigs on and a hydraulic bender so bending and keeping things lined up is not an issue. I will get with poly performance on the ends today. Thanks again for the quick responses and If all goes as planned i may turn out a few sets while the jig is in place. I'll post pics of workmanship after mine are completed.
I've built a couple of sets and honestly there's not much to them, they're just fairly labor intensive to build. I have a jig for them also, but not totally nesecary. It sounds like you have the equipment and know how to build them.