• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Step up from 4BT?

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Looking for ideas on what is thought to be the next step up from a 4BT for diesel power and ease of swapover (electronic issues). Not concerned about the "Will it fit" question truthfully, more the "Will it work" question. Something that provides good torque and towing but can get out of its own way as needed.
Also, if known, what transmission is typically found behind said motor.
 

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
7.3 powerstroke would be my first diesel option. The E4od is what most of them had but they also came with ZF manuals I think. There are some 7.3 EB running around but I haven't seen much documentation on the swap.
 

blakerj10

Full Member
Joined
Dec 8, 2004
Messages
225
Loc.
Gillette
I don't know of a whole lot of options that would be in between a 4bt and the 3/4 ton pickup sized diesels. If not concerned about "will it fit" there are a bunch of options available from a full size pickup. A 12v 6BT would be the easy as far as no computer. I have seen a video (youtube) i think that had a ford 6.0 in a CJ. A 6.5 or 6.2 would not be to bad either but they are about the same power as a 4bt.

7.3 would probably get my vote as well if you were going with an engine of this size. In my opinion a gov spring, tune the pump a bit and a 4bt is awesome power. Especially in something the size of the Bronco.
 
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
I don't know of a whole lot of options that would be in between a 4bt and the 3/4 ton pickup sized diesels. If not concerned about "will it fit" there are a bunch of options available from a full size pickup. A 12v 6BT would be the easy as far as no computer. I have seen a video (youtube) i think that had a ford 6.0 in a CJ. A 6.5 or 6.2 would not be to bad either but they are about the same power as a 4bt.

7.3 would probably get my vote as well if you were going with an engine of this size. In my opinion a gov spring, tune the pump a bit and a 4bt is awesome power. Especially in something the size of the Bronco.

I have my eyes on going with a 6BT no comp controlled setup possibly, likely going to try and find a WHOLE vehicle to rip into. What years of the 6BT were no computer controlled?

7.3 might be out of my range for size, not that I wouldnt want to go that route. Of course a V block vs an inline 6BT might make for a better fit.

The Bronco wont be staying normal size at all, a lot of expansion will be done.
 

jpalmer

Sr. Member
Joined
Feb 15, 2008
Messages
436
Loc.
Boise, ID
I have my eyes on going with a 6BT no comp controlled setup possibly, likely going to try and find a WHOLE vehicle to rip into. What years of the 6BT were no computer controlled?

7.3 might be out of my range for size, not that I wouldnt want to go that route. Of course a V block vs an inline 6BT might make for a better fit.

The Bronco wont be staying normal size at all, a lot of expansion will be done.

I believe all of the 12 valve 6BTs are mechanical injection i.e. no computer. When they switched to 24 valve in the late 90's the computers came into play. You have peaked my interest guage Josh. You can EASILY make 500HP 1000ft/lb from those babies.
 
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
Not sure if autometer offers that gauge in their series yet ;D

You do know where the sending unit to measure pucker factor would be placed right?
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
I'd look into the earlier (mid '80s) 6.9s Tito. Mech controlled (I believe), much shorter (front to back) than a 6bt, plenty of power for a Bronco and you could always throw a turbo on the sucker. I've seen a ton of '80s Fords lately for sale, complete 4x4 6.9 diesel trucks for under $2K! Shop around and find one w/ a ZF in it and you've got it made. I was actually looking into them to transplant the Travelall body onto the complete Ford diesel chassis for my towrig...
 

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
I'd look into the earlier (mid '80s) 6.9s Tito. Mech controlled (I believe), much shorter (front to back) than a 6bt, plenty of power for a Bronco and you could always throw a turbo on the sucker. I've seen a ton of '80s Fords lately for sale, complete 4x4 6.9 diesel trucks for under $2K! Shop around and find one w/ a ZF in it and you've got it made. I was actually looking into them to transplant the Travelall body onto the complete Ford diesel chassis for my towrig...

X2, That a great idea. You can buy them cheap and no computer so it's easier to wire up.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I second the IH 6.9 N/A Diesel. 100% fully mechanical and makes gots of torque at 1400rpm. Turbo'd applications are factory and available cheap as well.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
If this is on the stretch you have the room to go 7.3 and E4od
 

ztoolman44

Full Member
Joined
Jan 8, 2005
Messages
304
Loc.
Farmington, Utah
I've owned both a 6bt and an early 7.3 IDI (same as the 6.9 but with a turbo essentially) and I would recommend the cummins in a heartbeat. Better mileage, more power, way easier to work on, cheaper parts, the list goes on and on. I would be more concerned with side to side space in the engine compartment than front to back. Once you got the V8 in there you would have a hell of a time even seeing the sides of that thing. That cummmins is the easiest thing to repair and hop up.

I have been looking into a 4bt but a 6bt doesnt seem like a bad idea either. Probably cheaper to buy a whole dodge pickup truck than it is to find a cheap 4bt too.
 

HoosierDaddy

Contributor
Bronco Guru
Joined
May 29, 2006
Messages
2,776
You already have a 7.3 donor in your stable , use that ! :)

You and I both know what a bone stock 7.3 can do in trucks that weigh as much as our Super Duty's/Ex's , Oh how I'd love to shoehorn one of those into an EB !
Imagine , you could probably run a 3.00 gear and overdrive !
I think I'm kinda glad in a way , that my 2001 Super duty is starting to rust out a little. I'll have a donor eventually. :)

You making a trail rig or a street ma-cheen?
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
Not a diesel but it would be a head turner. Only 150 octane needed. They put them in tanks too. Just a little adapter plate and your good to go.
 

Attachments

  • Rolls-Royce_Merlin.jpg
    Rolls-Royce_Merlin.jpg
    109.7 KB · Views: 108
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
I have been looking into a 4bt but a 6bt doesnt seem like a bad idea either. Probably cheaper to buy a whole dodge pickup truck than it is to find a cheap 4bt too.

I agree, then use the whole nv4500 and np231 or np241 setup.

Bax, this would be going in a 4 door on FW 1 tons. New family wagon/wheeler/camper (what do you think a pop up camper would look like on this? I think its up next. Wonder how many layers of dynamat I would need to quiet that 6BT? Depending on what I find, might just shorten the dodge chassis and throw the 4 door body on it.
 

ztoolman44

Full Member
Joined
Jan 8, 2005
Messages
304
Loc.
Farmington, Utah
I agree, then use the whole nv4500 and np231 or np241 setup.

Bax, this would be going in a 4 door on FW 1 tons. New family wagon/wheeler/camper (what do you think a pop up camper would look like on this? I think its up next. Wonder how many layers of dynamat I would need to quiet that 6BT? Depending on what I find, might just shorten the dodge chassis and throw the 4 door body on it.

That's not a bad idea. Most wouldn't even notice the difference. Coil springs in front and leafs in the back.
 
Top