• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Windsheld frame hinge install?

av bronco

Bronco Guru
Joined
Mar 3, 2008
Messages
1,742
Loc.
Palmdale CA
Hey guys, for those of you that replaced your windsheld frame hinge, how did you mount the hinge to the body? I just got the stanless steel frame & hinge, the old one is tack welded to the body & I want to bolt it on but there isnt enough meat on the ss hinge to countersink the bolts. any suggestions?
Thanks, Ken.
 

HGM

Sr. Member
Joined
May 24, 2010
Messages
973
Loc.
Senoia, Ga.
I'd have to check the size, but I used these with weld nuts. Worked out really well. The hinge doesnt sit flush to itself and you should have the rubber seal in there as well. So, you actually will have more room than it appears. Just make sure that the screws are staggared top and bottom. They need to alternate, between eachother.
 

mikeginn

Jr. Member
Joined
Mar 22, 2011
Messages
82
I have a fiberglass body, but I am using a piece of 1/4 stainless (the length of the hinge) and placing it underneath the cowl to support the frame. drilling the holes into the metal support and threading them. then running a bolt thru the hinge, cowl, and screwing it into the support.

dont know if it will work for a metal body, but a thought.
 
Top