• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Time for a Family Cage and need help!

DFWBroncoNewbie

Full Member
Joined
Jun 8, 2011
Messages
170
HI Folks,

I've tried to research all the old threads around this topic but can’t seem to get my questions answered thoroughly enough to execute it on my EB. Here are my questions and any help is mucho appreciated!

Looking to get a family cage for my 76 EB. I'm open to the style, brand, etc. but need help in determining what sort of cage or modification should be completed to alleviate these concerns:

1. I don't want to be smacking my knees on the bar each time I get in and out of the bronco. What can be done to get the cage as flush as possible to the dash and windshield?

2. How do I bring the cage down in a manner that I can still use my E-brake and glove compartment. (I'm assuming I’m out of luck around these two items based on what I've read from previous posts.)

3. Do they make cages with thinner bars in front to accommodate for more passenger room?

4. What can I expect to pay for a family cage + weld + sand blasting + paint?

Any suggestions or words of wisdom is much appreciated from the DFW Bronco Newbie...
 

Attachments

  • 76 Bronco.jpg
    76 Bronco.jpg
    54.6 KB · Views: 177

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
I went with an Extreme Custom Fabrication cage with a few add on's and am happy with how it turned out. It came in pieces and I spent allot of time fitting it the way I wanted it to fit and it clears my e-brake but not the glove box so I put a hinge in it so it swings out and clears the front hoop.

Link to glove box hinge mod

I have no issues with lack of room because of the cage. I use it to get in and out and it does not affect my passengers.
I don't think it would fit as nice if I ordered a pre-welded cage. Every Bronco is a bit different and you may want the bars in different locations.

There is no real need to sandblast the cage unless you want it powder coated.

If you want to just orders something complete then have it painted and installed I would think it will cost you $1500 to $2000+ depending on options.

You don’t have to spend a lot of money for a nice cage but you will have to put a lot of effort in to make it nice. I think the basic Extreme family cage is around $550 shipped but it takes days of effort to cut and fit it. Also the hoops come cut to save on shipping and need to be slugged (they include the slugs).

Most of the vendors offer full cages and they all have pros and cons.
Good luck.
 

jperry1290

Sr. Member
Joined
Jul 1, 2010
Messages
920
try broncobob. i got a good deal on black friday and he gave me great customer service. fyi its the same as toms
 

markyyg

Contributor
Jr. Member
Joined
Sep 2, 2006
Messages
70
time 4 a cage

I did the glove box flip and love it, lots of room and if done cleanly people dont even notice. just my 2cent, mark
 
OP
OP
DFWBroncoNewbie

DFWBroncoNewbie

Full Member
Joined
Jun 8, 2011
Messages
170
Thanks guys for the reply.

John - I've been looking at Extreme Custom Fabrication's cages and am leaning towards them so far. I'm curious, do you have any pics of your cage on the driver’s side by the e-brake. I'd love to see what you did.
 

gsmalley

New Member
Joined
May 16, 2011
Messages
35
Roll Cage

Hey Fellow Newbie,
I just got a 66 Bronco and it has a family cage. I was thinking that I am going to switch it out with the single bar cage for the same reasons. It will probably be available for cheap soon.
Glenn
 
OP
OP
DFWBroncoNewbie

DFWBroncoNewbie

Full Member
Joined
Jun 8, 2011
Messages
170
ok, I just saw this set up. How crazy hard do you think this would be?
 

Attachments

  • Dash cut.jpg
    Dash cut.jpg
    66.8 KB · Views: 311

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
The cage that goes through the dash is sweet but you will need to move the e-brake for that set up. I will try to get a pic but I did not have to move my e-brake at all. I can get my foot on half of the pedal and am able to push it down. It has about 3/4" of clearance to the front hoop.
 

BoltBuster

Bronco Guru
Joined
Jun 5, 2002
Messages
2,051
1. Crab use to sell a great cage on here and tucks in very well, just not sure if he still sells them.

2. Roll Cages dont usally go around these for just structure intergity

3. again strutural integrity, but I havnt ever had a unconfortable passanger

4. Any where from 600 and up not counting shipping and who does it
 

Broncofan76

Sr. Member
Joined
Jul 2, 2010
Messages
432
Loc.
Atlanta
I researched the same concerns that you have and i ended up going with a family cage from mike at extreme custom fab and i think it'll be great. He's really good to work with and shipped fast. I started working on getting it put together tonight. I am making my own mods to it to include going through the dash which might require a glove box and e-brake mod. My main goal is to keep as much foot and head room as possible. I'll take a bunch of pics tomorrow as I get it welded up.
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Just my .02 cents on this! However, the Extreme Custom Fab cages look really nice but they don't look like they fit really tight in regard to the way that the front hoop is constructed. They are gonna come off the windshield at least as far as the back of the wiper motor for clearance and that is gonna pull it back pretty far in front and it looks ehh IMHO.

If you want, I would check out PROTOFAB as well if I were you! I have a cage with similar front construction as the Extreme and I am replacing it because I don't like how it fits at all. It could be alot tighter in my eyes.

I have seen the PROTOFAB cages and they fit really nice and tight to the dash and windshield frame because of the way he has designed it in regard to the wiper motor.

Just my opinion though! Good luck with whatever path you choose! ;D

Here is a pic of my cage and how it looks from the side and that extreme cage will be pretty much the same fit for the most part.
 

Attachments

  • Bronco Build Pics 2011 003.jpg
    Bronco Build Pics 2011 003.jpg
    127.3 KB · Views: 282

okorangebrnco

Bronco Guru
Joined
Nov 25, 2004
Messages
1,669
Here is a dew shots of my new Bailie Bilt family Custom
 

Attachments

  • roll cage1.jpg
    roll cage1.jpg
    99.7 KB · Views: 264
  • roll cage 2.jpg
    roll cage 2.jpg
    103.2 KB · Views: 229

strider

Full Member
Joined
Apr 14, 2002
Messages
228
Loc.
Holland
I went with the unthinkable option of copying Jeep. I ran the bars to the top of the windshield frame. Understanding that this is not as strong as it would be if I went to the floor, it is still significantly better than no cage. The middle hoop is still just behind the front seats for front seat protection.

Full access to parking brake, no dash mods, and no knee knockers.

This option is not one I'd recommend for racing or hyper agressive drivers.
 

muskrat

Bronco Guru
Joined
Aug 21, 2008
Messages
1,503
I went with an Extreme Custom Fabrication cage with a few add on's and am happy with how it turned out. It came in pieces and I spent allot of time fitting it the way I wanted it to fit and it clears my e-brake but not the glove box so I put a hinge in it so it swings out and clears the front hoop.

Link to glove box hinge mod

I have no issues with lack of room because of the cage. I use it to get in and out and it does not affect my passengers.
I don't think it would fit as nice if I ordered a pre-welded cage. Every Bronco is a bit different and you may want the bars in different locations.

There is no real need to sandblast the cage unless you want it powder coated.

If you want to just orders something complete then have it painted and installed I would think it will cost you $1500 to $2000+ depending on options.

You don’t have to spend a lot of money for a nice cage but you will have to put a lot of effort in to make it nice. I think the basic Extreme family cage is around $550 shipped but it takes days of effort to cut and fit it. Also the hoops come cut to save on shipping and need to be slugged (they include the slugs).

Most of the vendors offer full cages and they all have pros and cons.
Good luck.

I used the same cage that JohnJohn did, Extreme. I have no welding skills, so I took it to a really good fabricator that builds race cars. He was a perfectionist, so he ended up doing a lot of rebending to make the angles on the front and rear match up with the windshield angle and the angle of the rear soft top, when in the up position. No knee knocking at all. E brake works great, and I did the glove box mod that JohnJohn linked you to. My fabricator advised against powder coat due to chipping. You'll never match up texture. He painted mine with Krylon primer in a flat black. It looks cool.

Good decision on the cage. Safety, safety, safety.
 
OP
OP
DFWBroncoNewbie

DFWBroncoNewbie

Full Member
Joined
Jun 8, 2011
Messages
170
Hi Guys, Thanks for all the posts ~ Lots of good data here.

I think what I might end up getting is a set of bars from Extreme Custom Fabrication and then having a local place (HCC Performance) put it in for me. From everyone's comments I'm getting the picture that getting it lined up properly in the front could be tricky. I'm really liking the 'through' the dash set up but need to find out how much work will go into the E-brake mod. Seems I forgot that I don't really have that much room in the glove box due to my vintage air kit that was just put in.

If anybody has pics on how they set up their bars and the e-brake that would be really helpful!
 

wdbowers

Sr. Member
Joined
Jul 31, 2004
Messages
462
Loc.
Ada, Ok
Come to OCBR in September and you could WIN a family cage from BAILIE BILT that he has donated. Gordon Bailie is in Tulsa and could also build you a custom cage but the price is higher than is listed on his web site because of the extra work involved but might be less expensive than buying a kit and having someone else install it. He is at kansas Rocks today so it would be hard to get ahold of him today to ask and he doesn't do computers.
 

Broncotis

New Member
Joined
Feb 1, 2011
Messages
38
Loc.
Hodge, LA
Cage

Put in cage from Toms Bronco, try relocating your e-brake to the tunnel in the middle using a handle actuator from a compact car.
 

BoltBuster

Bronco Guru
Joined
Jun 5, 2002
Messages
2,051
Hi Guys, Thanks for all the posts ~ Lots of good data here.

I think what I might end up getting is a set of bars from Extreme Custom Fabrication and then having a local place (HCC Performance) put it in for me.

If anybody has pics on how they set up their bars and the e-brake that would be really helpful!

DFW,

Take a look at what it will cost to get it welded there, it may be less pain and cheaper, the shipping should be the same. Some weld shops will bait and switch once youve got it in front of them and do a worse weld job and leaving you the clean up.

Dont sweat the e-break issue, you can simply add a small extension pad on the peddal to offset it from behind the bar.

The glove box can be modified through the hinges or cut out and rotated 180 deg., putting the speaker vent behind the bar, or you can use a 125$ tuffy box (being the easiest)or purchase a aftermarket dash already setup for it.
 
OP
OP
DFWBroncoNewbie

DFWBroncoNewbie

Full Member
Joined
Jun 8, 2011
Messages
170
Thanks Bolt!

I figure the cost of the cage and shipping is simple. The part I don't know is the weld, paint, and install. I'm waiting for the shop to tell me the exact cost since they have had my rig for the past 3 weeks. (New Aux Tank, A/C, new floors, electrical, LED lights, etc) I think they are going to quote me $2K for the cage work. That feels kinda high even with the custom dash mods. Thoughts?
 

HoosierDaddy

Contributor
Bronco Guru
Joined
May 29, 2006
Messages
2,776
Put in cage from Toms Bronco, try relocating your e-brake to the tunnel in the middle using a handle actuator from a compact car.

Most of the threads that I have seen regarding a hand parking brake had issues with the hand brakes not having enough "throw" or "pull" the get the brakes to grab/engage sufficently.

I'm sure somebody out there has had luck with this idea though , I hope they chime in. I'll be looking into this also , hopefully , at some point , soon.
 
Top