• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

OCBR 2011 before anyone asks....

Buldozer

Bronco Virtuoso
Joined
Oct 17, 2007
Messages
3,066
Loc.
God's Country
Well got under my rig tonight and removed my on-board air tank on the right side so I can mount the right side rocker guard and while I was under there working I noticed a bolt backed out on the flange on the Hi-Angle drive shaft I run in front. Long story short, I had to remove the shaft completely and reinstall it as all of the bolts were loose! :eek: That saved a trail repair for sure, as it would not have survived a hard week of wheelin in the unforgiving Hot Springs rocks. I will have to keep a close check on it going forward.......maybe I will make some progress on the rockers next time %)
 
OP
OP
2Broncos2Go

2Broncos2Go

Bronco Guru
Joined
Aug 20, 2002
Messages
5,420
Wheew.........That was close Rick!.....
^
^
^
^
^
and be sure you check those lug nuts too!
 

SpareParts

Bronco Guru
Joined
Nov 13, 2004
Messages
5,595
I always check my driveshaft bolts on my CV's and my yokes. More than once I have saved myself the same way. The 8mm bolts tend to loosen up on my rear DS also.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
A big THANK YOU to my local help!!!! The bags are stuffed...more stuff sorted and ready to load...The pics don't do justice to all the boxes....
Harlan didn't get the hall shots or the spare bedroom full of stuff!
It's only a little over a week away.............
C'mon....Load Up and Join us..............

You'll be Glad you Did!!!!;D

Thanks everyone!! ;)
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
....maybe I will make some progress on the rockers next time %)

You not going to get your rocker guards on Rick?


This will be the first year that I haven't made some type of upgrade, have a few to do but nothing got done along with no progress on the 75.
 

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
Ok NEW question?????

Are there any 1,2,3 trails designed to go up and watch the guys on the 4's and nasty 5's?
 
Top