• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Broken Liftgate lock assembly

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Does anybody know what's missing from this liftgate lock assembly? It's from a 66' with a handle and separate lock cylinder. When the cover is removed you can see how the lock actuator is supposed to move back and forth but the there's something missing from the rear of the lock cylinder, as if there's supposed to be some cam gear or something that drives the lock actuator arm.

Anybody know where I can find one of these?

IMG_0351.jpg


IMG_0349.jpg


IMG_0350.jpg
 

NicksTrix

Bronco Guru
Joined
Aug 1, 2001
Messages
6,410
looks like arm arm and a clip/retainer to keep said arm on. the rod more than likely has a clip like the other rods do.
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
It looks to be broke off there.Should be a little wing with and eyehole for that rod to clip in.I don't know if one off an old set of door locks would work or not?
 

NicksTrix

Bronco Guru
Joined
Aug 1, 2001
Messages
6,410
now you just need an e-clip to hold that arm on along with a clip for the rod.

glad to help. we all have our moments. i know sure do.... ;)
 
Top