• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

My BAB Project

scott71

Jr. Member
Joined
Feb 18, 2012
Messages
56
Loc.
Clarksburg, MD
Thanks to everyone for the help. My funds are somewhat limited right now so I have to start small. A neighbor load tested the battery that it came with and it seems that his is where to start. When I took the battery out I noticed the brackets under the tray didnt look so great. I guess if I want to do this right I should replace them. I think I found the set of brackets on Tom's Bronco parts. They say core support brackets. I guess thats right. Do I just take it somewhere and have these welded in place or do they make some that can be bolted in place?
Thanks

IMG_0217.jpg IMG_0219.jpg IMG_0221.jpg

*** ADMIN EDIT - I (admin) have cleaned up this thread a little. There's already a 600+ reply thread going on the history of Scott's Bronco from BAB. Every thread that Scott starts from now on doesn't need to rehash that same thread again. Let's keep to the topic and offer him the tech help he's looking for, OK? If you want to comment on how he got his Bronco, go to that thread. Keep the comments here related to his questions. Others will be deleted by me.

Thank you. - Jon Hanna, Admin ***
 
Last edited by a moderator:

Wyflyer

Bronco Guru
Joined
Apr 1, 2008
Messages
2,920
Scott, is this the Buildabronco.com vehicle you just bought for 30,000?? If so, then is the front of the grill painted? Welding in a new one will smoke the paint..
 

Wyflyer

Bronco Guru
Joined
Apr 1, 2008
Messages
2,920
I think this is going to be a long thread. My suggestion is to first post up a bunch of good pics. It will provide a point of reference for the people here who can give advice.
From this first set of pics, I can now see that you are going to have some body rust issues to go along with the electrical problems you described in your prior thread. Dont screw up the paint yet. You can bolt something in to hold the battery, even if it's plywood.
My advice is to fight one problem at a time. Don't start fighting this rust problem too deeply or you'll end up with the entire vehicle in pieces in the shop floor. For now figure out how to get a battery back in it in a way it won't fall on the highway. Get it running, solve the electrical problems and get it where it starts and runs reliably.
 
OP
OP
S

scott71

Jr. Member
Joined
Feb 18, 2012
Messages
56
Loc.
Clarksburg, MD
I think this is going to be a long thread. My suggestion is to first post up a bunch of good pics. It will provide a point of reference for the people here who can give advice.
From this first set of pics, I can now see that you are going to have some body rust issues to go along with the electrical problems you described in your prior thread. Dont screw up the paint yet. You can bolt something in to hold the battery, even if it's plywood.
My advice is to fight one problem at a time. Don't start fighting this rust problem too deeply or you'll end up with the entire vehicle in pieces in the shop floor. For now figure out how to get a battery back in it in a way it won't fall on the highway. Get it running, solve the electrical problems and get it where it starts and runs reliably.

Damn. I had a feeling you were going to say that. Sounds like good advice. Thanks.
 

ky-resto

Sr. Member
Joined
Feb 3, 2002
Messages
700
Welding shouldn't smoke the grill, but will def smoke the front of the core support. Can't believe this was a rig a professional shop did- not to beat a dead horse.

If you hook up with somebody that's got a welder, this is not a huge fix, but as Wyflyer said, you will want to focus on one thing at a time so you don't get overwhelmed. BTW- this is a nicer rig than a lot that are out there- you'll have a nice one when all is said and done!
 

66ALRIDE

Just BIP It!
Joined
May 9, 2005
Messages
1,785
Loc.
Dothan, AL
Just from looking at pictures you posted here I can see you need the core support brackets, possibly the body mount support replaced, the radiator core support and fender apron need to be stripped and rust treated. There is also a possibility the core support could have damage to it too. From the link of the core support brackets you will only use 3 of those pieces but it will cheaper to buy the kit usually.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
I agree with the "fight one problem at a time" approach. I suspect initially you will find several issues you will want to resolve. My suggestion is to make a list of all the issues, then resolve them one at a time. If you try to tackle too many at one time you will quickly become overwhelmed. I installed a white board in my garage 10 years ago to keep track of my various projects, and still use it.

Since you've already got the battery tray out, I don't see a problem with taking care of the rusted core support bracket. I had the same issue when I bought my Bronco. Nothing says you have to weld in the new core support. Also nothing says you have to use a factory replacement core support bracket. I made one out of aluminum angle 15 years ago, and fastened it into place with nuts, bolts and some fender washers. Then I bolted my shiney new aluminum diamond-plate battery tray to them. (I made two supports)

Just make sure you go at this one issue at a time. If you want to resolve the core support/battery tray issue now, go for it. Then you can move on to the next issue.
 
Last edited:
OP
OP
S

scott71

Jr. Member
Joined
Feb 18, 2012
Messages
56
Loc.
Clarksburg, MD
Thanks. I'm breathing into a paper bag right now. I'll post up some more pics when it's done an move on to the next thing.
 

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,897
Loc.
Phoenix, AZ
I've cleaned up this thread a little. There's already a 600+ reply thread going on the history of Scott's Bronco from BAB. Every thread that Scott starts from now on doesn't need to rehash that same thread again. Let's keep to the topic and offer him the tech help he's looking for, OK? If you want to comment on how he got his Bronco, go to that earlier thread. Keep the comments here related to his questions. Others will be deleted by me to keep this thread on topic.

Thank you.
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Dayum! Those supports should be relatively easy to replace and won't affect the paint on the grill at all. If you're worried about it in the slightest, hang a drop cloth between the core support and grill then weld away. I'd wire wheel the crap out of that whole area, wipe it down with laquer thinner, prime and paint it while I was in there too (after welding of'course).
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
I just redid my e-brakes TWICE (once with drums, again with rear discs). You still having ebrake issue while it's fresh in my head....?
 
OP
OP
S

scott71

Jr. Member
Joined
Feb 18, 2012
Messages
56
Loc.
Clarksburg, MD
xcntrk- Yeah, but have been warned to take on step at a time or i may have a heart attack. Hope to get the brackets taken care of this week then on to the brake. Thanks i really appreciate it and will take up up on it.Thanks
 

Buldozer

Bronco Virtuoso
Joined
Oct 17, 2007
Messages
3,066
Loc.
God's Country
I put a battery box in mine without welding at all. I bolted it in. Worked great to. This might be an option you might want to consider since it is already painted. ;) I would also clean up the other area around the battery box and paint it with some POR or something to stop the rust and corrosion or your going to have bigger problems down the road than just the battery box IMO.
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
As stated one step at a time and put the saftey related items at the top of said list. Post some pictures and the list and you'll get all the help you need.;D
 

doran4x

Contributor
Sr. Member
Joined
Dec 31, 2004
Messages
405
Scott,

Ask around the local welding shops and find one that has a spot welder with long arms. That is the proper tool to attach the battery tray brackets.

Good luck.

Tom
 

surfer-b

Contributor
Bronco Guru
Joined
Sep 7, 2006
Messages
3,013
I'm not sure which way to go here, I know once you start with replacing metal parts on that rig its gonna snowball but if you want to replace those battery tray supports just keep in mind that you will prob have to undo what you fix just to fix the other stuff around it. I would do as others stated and do a temp fix on that. If you have a piece of 3/4 plywood make 2 pieces like the supports and screw them in place, then once you have the funds or decide which way you want to go you can fix it right. I now this is half-ass I'm just trying to keep the cost down and keep you from having to do this twice. However if you do decide to replace with new metal parts dont worry about smoking the grill you will be welding to the core support and its not painted, just cover between them if you are concerned about it.
If you didnt live way to hell up in Md I would be more than glad to help you out. Hey are there any members here close to this man to help him out a little?
 

Bundy

Bronco Guru
Joined
Jan 10, 2009
Messages
2,045
Good god that is f**ked up. You need a Bronco Brother to check that thing out in person and give you some advice and maybe help you fix those supports. It's not as hard as it seems.

I'm trying to stay on topic but WOW... sickening.
 
Top