• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ted Nugent 1966 HalfCab Build Thread

Status
Not open for further replies.

dube

Bronco Guru
Joined
Feb 19, 2012
Messages
1,042
Loc.
big lake Mn
you no what, i'am new here. i dont like how this going. i fly heli's as a hobby. and have left forum's because of this crap.
now. i have met ted. great guy. a little off the wall. but thats what i like. uncle ted is very smart. he want's the best, and dont we all for the buck. ha ha i said buck, big deer to feed his family. and i'am very sure what every he gets on this bronco, we would all drule over. wish i had his buget to spend on mine, but i dont. lets leave the name calling out of it. this will be a great build any how he has it done. because he is saveing a bronco from the scrap yard. ted give me a call when your in the area. good to know ya.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
you no what, i'am new here. i dont like how this going. i fly heli's as a hobby. and have left forum's because of this crap.
now. i have met ted. great guy. a little off the wall. but thats what i like. uncle ted is very smart. he want's the best, and dont we all for the buck. ha ha i said buck, big deer to feed his family. and i'am very sure what every he gets on this bronco, we would all drule over. wish i had his buget to spend on mine, but i dont. lets leave the name calling out of it. this will be a great build any how he has it done. because he is saveing a bronco from the scrap yard. ted give me a call when your in the area. good to know ya.

Teds Budget? You really think Ted is paying? Not a dime, he gets everyone to donate parts and then plays the media extravaganza card on the builder and dupes them into doing it for free. Pretty funny really.
 

BroncoJAK

Bronco Guru
Joined
Sep 24, 2002
Messages
2,813
Does he have a permit to carry that hand gun he's posing with in his pics. Big man look's like a want a be to me. Why not pose with Scott's 30 grand In your hands. You guys didn't give up when several of the members sent there money to someone on here and didn't receive what you paid for. You bashed him for months and even hunted him down till it was made right. This thing with Scott's bronco is no different don't give up until this is made right. Buildabronco just fixing a few thing's on his truck and thinking it will make it right it will not. I'm sure there is someone that was thinking about getting you to build them a bronco that has heard about this and is looking somewhere else now. I will continue to let this be known and discourage as many as I can. Not by lying but by showing your work on this truck. You have put out good work in the past why do this kind of work for Scott why is his truck in the shape it's in when you have 30 grand of his money????? Why did and do you think this was right???????

You just proved it right there. You're going out of your way to sway anyone that is considering using BAB to go elswhere. Yet you have so many questions on the situation you're basing your judgement on.
 

BroncoJAK

Bronco Guru
Joined
Sep 24, 2002
Messages
2,813
Teds Budget? You really think Ted is paying? Not a dime, he gets everyone to donate parts and then plays the media extravaganza card on the builder and dupes them into doing it for free. Pretty funny really.

Damned 1 percenters.;D
 
OP
OP
buildabronco.com

buildabronco.com

Full Member
Joined
Jun 30, 2010
Messages
348
Loc.
Tekonsha, Mi
Well then, how about some more Nugent pics.
 

Attachments

  • DSCN1552.jpg
    DSCN1552.jpg
    118.6 KB · Views: 203
  • DSCN1554.jpg
    DSCN1554.jpg
    119.8 KB · Views: 201
  • DSCN1555.jpg
    DSCN1555.jpg
    106.7 KB · Views: 200
  • DSCN1571.jpg
    DSCN1571.jpg
    108.9 KB · Views: 214
  • DSCN1578.jpg
    DSCN1578.jpg
    118.2 KB · Views: 191
  • DSCN1579.jpg
    DSCN1579.jpg
    70.8 KB · Views: 183

dube

Bronco Guru
Joined
Feb 19, 2012
Messages
1,042
Loc.
big lake Mn
Teds Budget? You really think Ted is paying? Not a dime, he gets everyone to donate parts and then plays the media extravaganza card on the builder and dupes them into doing it for free. Pretty funny really.

how ever its done. scotts might be a fluke. and is getting recanition from this thread. so maybe it can be righted. i dont no. but if i spent 30,000 on a build, i would be all over that truck looking at every thing x2 before i paid for it. i'am not here to start a war. i love these trucks just like my 4 kidds.
 

DonaldDouchebag

Bronco Guru
Joined
Apr 17, 2008
Messages
1,122
Against my better judgement I'm going to address this. No Barry I would not be doing what you are doing if it were Ted and not Scott. I'm sure i would be just like you are now. There is no way you know all there is to know about this transaction. You're basing your judgement against BAB on what you've read on CB. You have no idea what BAB has invested in it. You don't have first hand experience with this vehicle. You are not Scott you are not BAB. Mind your head jumping on the band wagon. You are enjoying the anonymity of the internet and the mob. You have every right to form your own opinion, but you do not have the right past judgement on me when I don't share your opinion.

As to what this truck is worth. As a teenager I was shopping for an early Mustang. I found one for sale and asked the man for a price. He told me I want this much, I said it's not worth that. He took a step toward me put his hands on his hips and said, I didn't say it was worth it I said that's what I want. Not his fault I paid what I did for it.

Douchbag this is why I don't like you. What you're doing right now. If someone doesn't want to hear what you have to say move on. Go away! on second thought grow up and go away!
No thanks. I'll stick around and continue doing what I'm doing and, quite frankly, I really don't care if you like me.

Your teenage story is nice but not germane to this situation. BaB "built" a rusted, unsafe Bronco for $30,000 and refused to take it back. That is unacceptable.
 

brianstrange

Bronco Guru
Joined
Nov 22, 2011
Messages
1,626
I don't think Ted gives a dam what anyone else thinks of him, but from what I understand, he's a cool guy. That said, BAB may have screwed up on an earlier build, but the one pictured in this thread looks great. Everyone on this thread, builder, buyer, consumer, vendor, have all learned over time, making nobody an instant expert. Progression is the key here, and the question here is are you better than your last. Some are behind others, but we're all on the same friggin trail.
 

DonaldDouchebag

Bronco Guru
Joined
Apr 17, 2008
Messages
1,122
I don't think Ted gives a dam what anyone else thinks of him, but from what I understand, he's a cool guy. That said, BAB may have screwed up on an earlier build, but the one pictured in this thread looks great. Everyone on this thread, builder, buyer, consumer, vendor, have all learned over time, making nobody an instant expert. Progression is the key here, and the question here is are you better than your last. Some are behind others, but we're all on the same friggin trail.

May have screwed up on an earlier build? They built, and I use the term "built" loosely, the rolling deathtrap in question less than six months ago. I suggest you read the other thread in off topic.
 
OP
OP
buildabronco.com

buildabronco.com

Full Member
Joined
Jun 30, 2010
Messages
348
Loc.
Tekonsha, Mi
Sorry guys my internet here at home is slow tonight so taking way too long to load more pics, will do tomorrow.
We have the body set on the frame. Right now we are working on installing the Painless wiring kit, getting the steering setup, rebuilding and installing the column, then the body is going back to the body shop for fitment of doors, hood, tailgate and half cab top. We are also making decisions on exterior lighting. Looking at some small KC LED lights that we can sink in the front and rear bumpers. Ted was very specific on making the aux. lighting protected. We are sticking with the original front Bench seat. Another of his specifics was to make sure its Black. No chrome or shiny stuff on the body. We are looking at powder coating the fake beadlock rings black. We have the sweet LoCoFoMoCo Optima battery box, and the Classy Chassis rebuilt cluster here just waiting to be installed. I will try and update on a more regular basis please checkout our Facebook page and our Youtube Channel for more updates.
 

Bronco717274

Bronco Guru
Joined
Jan 27, 2008
Messages
1,199
Loc.
Tremont, Ms.
There are other means of communication other than this site. E-mail and phone calls are a few I have made , yes there are thing's that haven't been said on this site. I won't mention them on here because I said I wouldn't but I know a lot more then most of you know on here. So I do know what I'm talking about as far as this truck goes. Thing's can and may be fixed we'll just have to wait and see, If apologies are in order I'll be the first to post mine but we're not there yet. Buildabronco has produced nice trucks in the past and can do so in the future. Don't know why this truck got out in the shape it's in but it did and this is what I've been talking about. I never said I wanted them to go out of business I just wanted them to make this right with Scott. I called them a thief and a crook because that is what they were doing to Scott. I said I would talk about this all I can where ever I could to keep this from happening to someone else. I said I was in this for the long haul not just to follow the crowd and sound good on the internet. I want what is right for someone who didn't know what he should have done and didn't know what to look for and just got taken advantage of.Scott is to blame here to but not as much as Buildabronco is. Maybe trying to recoup his money back from when he was a teenager on that mustang. 30 grand should have gotten him a truck that was safe and driveable but it didn't and for this alone I'm sticking to my morals and will do what I have to to get this made right. I could be going around telling people what good work and good people you are but just can't do it knowing this truck is out there with your name on it in the shape it in. You knew before you loaded that truck on the trailor to deliver it to Scott it wasn't right but you alone chose to take it to him anyway. You just didn't figure on him finding this wonderful site and all us bronco lovers telling him he'd been had. I'll say it in a nice way, PLEASE make this right for you and Scott where we can all get back to our lives and feel good about one another again. Thank you!
 

nemo

Jr. Member
Joined
Sep 30, 2010
Messages
87
Loc.
Brighton
how ever its done. scotts might be a fluke. and is getting recanition from this thread. so maybe it can be righted. i dont no. but if i spent 30,000 on a build, i would be all over that truck looking at every thing x2 before i paid for it. i'am not here to start a war. i love these trucks just like my 4 kidds.

What good would that have done for Scott,he already said he didn't know anything about broncos or was mechanical inclined. Just because something looks good does't mean it is ,looks can be deceiving.look at the problems of the other Bronco in Scotts original thread ,Transfer case bolts missing or loose,rear seat bracket installed backwards causing seat to come loose WITH KIDS IN IT.Would you have been able to see them, unlikely.When you hire some one to build something,be it a Bronco ,house ,furniture,what ever you put your trust in them,to do the job right remember they are the ones calming to be the "Professionals" BuildABronco.com took advantage of that trust and screwed Scott over.I hope BuildABronco.com remembers what goes around comes around ,your time is coming.
 

dube

Bronco Guru
Joined
Feb 19, 2012
Messages
1,042
Loc.
big lake Mn
What good would that have done for Scott,he already said he didn't know anything about broncos or was mechanical inclined. Just because something looks good does't mean it is ,looks can be deceiving.look at the problems of the other Bronco in Scotts original thread ,Transfer case bolts missing or loose,rear seat bracket installed backwards causing seat to come loose WITH KIDS IN IT.Would you have been able to see them, unlikely.When you hire some one to build something,be it a Bronco ,house ,furniture,what ever you put your trust in them,to do the job right remember they are the ones calming to be the "Professionals" BuildABronco.com took advantage of that trust and screwed Scott over.I hope BuildABronco.com remembers what goes around comes around ,your time is coming.
like i said NEMO, i'am new here. i have not read every thread. but your right. if they claim to be pros at this stuff. then they should double check everything before the costumer picks it up, and walk him threw the whole thing, just like when you buy a house,car,truck. and i dont no what you meen by, My time is coming? i do the work myself. I take my time and do it right the first time.
 

nemo

Jr. Member
Joined
Sep 30, 2010
Messages
87
Loc.
Brighton
like i said NEMO, i'am new here. i have not read every thread. but your right. if they claim to be pros at this stuff. then they should double check everything before the costumer picks it up, and walk him threw the whole thing, just like when you buy a house,car,truck. and i dont no what you meen by, My time is coming? i do the work myself. I take my time and do it right the first time.


Sorry that part was meant for BuildABronco
What goes around comes around BuildABroncos time is coming
 

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,896
Loc.
Phoenix, AZ
I've been on the phone with both Scott and Brian with BuildaBronco and it sounds like they are close to coming to an agreement on the Bronco he purchased from them. Scott has told me (and some of you in PM's) that the continued negative comments aren't helping his negotiations. So please everyone just take a breath and let him continue to work it out without throwing more fuel on the fire.

Thanks.
 
Status
Not open for further replies.
Top