beaux312
Sr. Member
Has anyone used the Explorer lower and upper intake with the Explorer heater tube assy ?
I am having clearance issues with ECT sensor and water temp guage sensor and the TFI distributor
I will get some good pics of what I did
Has anyone used the Explorer lower and upper intake with the Explorer heater tube assy ?
I am having clearance issues with ECT sensor and water temp guage sensor and the TFI distributor
I will get some good pics of what I did
Here's one of mine after I painted the intake and Valve covers
thanks again for the pics....................what is that power steering reservoir off of ?
Yeah - that reservoir does not look very pump friendly at all, have any troubles burning up pumps? If not, I'm guessing the pump is stock and not all that demanding...
05 F250 PStroke
Whats not friendly about it? It has a 11/16 hose that feeds the pump.
Whats not friendly about it? It has a 11/16 hose that feeds the pump.
It's the distance that matters. I'm going to guess you are running a stock pump as I ran an even larger reservoir on my fender and the pump didn't last a weekend - just too much demand. Granted you are running roughly a 10% larger hose, I still don't think that would be enough -
I'm only speaking from experience - your results may vary.
Didnt know that I will have to keep a eye on it now.![]()






