• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on. - Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

TN NEW PICS '66 U13 Springtime Yellow, uncut

Status
Not open for further replies.

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Available is a very solid and original '66 U13 Roadster in a great color, Springtime Yellow. Its been in TX since '66, and still has an old '69 front plate. The tub is super solid, it's early enough to have the metal fresh air box, and eyebrow grill. It also has a Red tape rocker stripe and the firewall rain gutter. All the sheet metal is original, the front floors have some pitting but are solid and have no holes. It looks to have had a bulkhead and maybe a bench seat originally. There are no factory holes drilled for a rear seat.

The inserts need a little attention, but the backing plates are nice and the bottoms are not rusted out. It starts and runs good. The column shifter needs a rebuild ( I'm sure I have a good one laying around) Wheels/tires shown are not included. A set of factory steel wheels with rollers will be mounted. I have a correct steering wheel which will also be installed and a non '66 front bumper. Included too is a pair of '66 buckets with Black covers.The roadster specific mirror is intact. This also has dual factory lighters in the dash...cool! The engine bay is incredibly stock and correct too.

PM me for more details. Vin is U13FL753600. Sold with clear title.
If it doesn't sell, I might have to snitch some of the goodies for another U13 project. Buy it now and keep it together. This is a great foundation for someone looking to restore a Rosdster.
 

Attachments

  • 2012-09-16 17.33.14.jpg
    2012-09-16 17.33.14.jpg
    99.9 KB · Views: 635
  • 2012-09-16 17.34.51.jpg
    2012-09-16 17.34.51.jpg
    123.1 KB · Views: 621
  • 2012-09-16 17.35.12.jpg
    2012-09-16 17.35.12.jpg
    91.8 KB · Views: 519
  • 2012-09-16 17.33.53.jpg
    2012-09-16 17.33.53.jpg
    116 KB · Views: 629
  • 2012-09-16 17.33.47.jpg
    2012-09-16 17.33.47.jpg
    89.9 KB · Views: 552
  • 2012-09-16 17.33.42.jpg
    2012-09-16 17.33.42.jpg
    110.2 KB · Views: 582
  • 2012-09-16 17.33.35.jpg
    2012-09-16 17.33.35.jpg
    124.4 KB · Views: 660
  • 2012-09-16 17.33.28.jpg
    2012-09-16 17.33.28.jpg
    153.7 KB · Views: 791
Last edited:
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
a few more pictures

More pictures
 

Attachments

  • 2012-09-16 17.36.22.jpg
    2012-09-16 17.36.22.jpg
    94.4 KB · Views: 202
  • 2012-09-16 17.36.07.jpg
    2012-09-16 17.36.07.jpg
    87.8 KB · Views: 228
  • 2012-09-16 17.35.18.jpg
    2012-09-16 17.35.18.jpg
    141.6 KB · Views: 208
  • 2012-09-16 17.34.21.jpg
    2012-09-16 17.34.21.jpg
    109.8 KB · Views: 192
  • 2012-09-16 17.34.07.jpg
    2012-09-16 17.34.07.jpg
    95.8 KB · Views: 208

Crawdad

Bronco Guru
Joined
Feb 16, 2011
Messages
3,635
There is a fella from NY who is stationed over in Afghanistan that is looking for an uncut EB. This would be a good start for him if interested. I'll clip the link to him.
 
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Thanks, I agree, to find an original uncut Bronco like this at a reasonable price is getting harder all the time.
 
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Here's a few more pictures.
 

Attachments

  • 2012-09-16 17.34.21.jpg
    2012-09-16 17.34.21.jpg
    109.8 KB · Views: 163
  • 2012-09-16 17.34.56.jpg
    2012-09-16 17.34.56.jpg
    104.6 KB · Views: 208
  • 2012-09-16 17.36.01.jpg
    2012-09-16 17.36.01.jpg
    81.4 KB · Views: 171

Gatesboy

Jr. Member
Joined
Sep 17, 2012
Messages
77
Loc.
Remsen
Thanks Crawdad :) but just bought one from Ourobos. Cant wait to get home and start ripping into it. That is a clean looking truck though!
 

Blue Bastard

Bronco Guru
Joined
May 14, 2012
Messages
2,161
dang baja, do you have a dealership bank floor plan to finace all these units? They are nice looking finds.
 

BajaBronco

Contributor
Bronco Guru
Joined
Apr 30, 2003
Messages
4,100
Great price considering how solid it is - wish I had the room.
 
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Thanks for the comments. I have a couple people wanting to see her belly. I'll take and post pics on here later today. The bottom is cleaner than the top. Minor surface rust only, and in most places if you wipe the metal off you can still see the Red Oxide primer.
 

6t6bronco

New Member
Joined
Apr 19, 2007
Messages
24
U13

Would like to see the under side and the passanger side also if you have any pictures.

It looks like something was welded to the frame in the front, has that messed with the frame any?
 
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
U13

How does it drive? Looks like quite a find.

The motor is great, so is the trans. The brakes are low, so I've only had it around the block. The linkage in the column is worn and hard to shift. I'm going to put another rebuily column in it this weekend.
 
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
Would like to see the under side and the passanger side also if you have any pictures.

It looks like something was welded to the frame in the front, has that messed with the frame any?

There must of been some sort of bumper mounted to that old bracket. I've already cut it of, there is no frame damage or issue. I've mounted a factory bumper already.
 

twisted77

Sr. Member
Joined
Dec 6, 2005
Messages
983
Loc.
Evansville, Indiana
Watch out Chris or someone might yell at ya for posting two different broncos in two different adds. Lol.

Great 66 I sure wish I had the money. You know I love 66's.

Good luck with the sale.

Bryce


Sent from my EB parts finder phone.
 
OP
OP
BajaFresh75

BajaFresh75

Bronco Guru
Joined
Jan 26, 2005
Messages
5,486
More pictures

Here's some belly shots I wiped the inner rocker and floor off with a wet red to show the Red Oxide. Very clean underneath.
 

Attachments

  • 2012-09-22 14.09.42.jpg
    2012-09-22 14.09.42.jpg
    79.1 KB · Views: 151
  • 2012-09-22 14.09.06.jpg
    2012-09-22 14.09.06.jpg
    69.7 KB · Views: 150
  • 2012-09-22 14.08.47.jpg
    2012-09-22 14.08.47.jpg
    95.8 KB · Views: 144
  • 2012-09-22 14.08.43.jpg
    2012-09-22 14.08.43.jpg
    86.1 KB · Views: 158
  • 2012-09-22 14.08.00.jpg
    2012-09-22 14.08.00.jpg
    85 KB · Views: 144
  • 2012-09-22 14.07.28.jpg
    2012-09-22 14.07.28.jpg
    91.4 KB · Views: 152
  • 2012-09-22 14.07.18.jpg
    2012-09-22 14.07.18.jpg
    108.2 KB · Views: 161
  • 2012-09-22 14.09.19.jpg
    2012-09-22 14.09.19.jpg
    108.9 KB · Views: 140

L70P

New Member
Joined
Sep 25, 2012
Messages
1
Looking for a Bronco close to Nashville

My wife and I just got back from the True Blue Truck show where she fell in love with the First Generation Broncos. I guess my trucks and Falcons will take a back seat until I find her a Bronco. Looking for anything from a builder to a driver original. Not interested in rock crawlers or trailer queens. Let me know if you have anything or know of anything within 300 miles of Nashville, Tn. Thanks
 
Status
Not open for further replies.
Top