• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Glass Bottom Fuel Pump?

66Uncut

Full Member
Joined
Oct 20, 2012
Messages
278
I was looking around on eBay at spare fuel pumps for my 66 170ci and came across several that have what looks to be glass bottoms:

Screenshot_2_25_13_3_00_PM_16DC24B6.png


It's a remanufactured pump, but that's ok for a spare (http://www.ebay.com/itm/170948036635)

Compared to mine:

Screenshot_2_25_13_3_02_PM_16DC250A.png


My part number tag looks like:

Screenshot_2_25_13_3_10_PM_16DC26DF.png


Anyone know of significant differences between the two?

Thanks!
 

SP66

Bronco Guru
Joined
Feb 26, 2012
Messages
1,363
I was looking around on eBay at spare fuel pumps for my 66 170ci and came across several that have what looks to be glass bottoms:

Screenshot_2_25_13_3_00_PM_16DC24B6.png


It's a remanufactured pump, but that's ok for a spare (http://www.ebay.com/itm/170948036635)

Compared to mine:

Screenshot_2_25_13_3_02_PM_16DC250A.png


My part number tag looks like:

Screenshot_2_25_13_3_10_PM_16DC26DF.png


Anyone know of significant differences between the two?

Thanks!

I do have the glass one similar to the picture on my 66 170
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
actually its pretty common for older 50's and 60's fuel pumps to have the glass sediment bowl. Not sure if they were OEM for a bronco but they did come stock on some vehicles although later on they tended to use a steel fuel bowl. biggest differance is that the glass sediment bowl allows dirt/water ect. to collect in the bowl. vs the other style that just sucks up whatever is in the fuel. of course the larger steel bowl fuel pumps have a filter inside as well. not sure if the second one in your pic has a filter or not. but probably not.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
The one you refer to as "yours" does not appear to have functional vacuum taps for operating the wipers.

The new plump looks factory to me, sediment bowl and all...have the same on my '67, and it does a good job of running the wipers too. But I'm not certain that one with the sediment bowl is the factory pump for an EB specifically...
 
OP
OP
66Uncut

66Uncut

Full Member
Joined
Oct 20, 2012
Messages
278
The one you refer to as "yours" does not appear to have functional vacuum taps for operating the wipers.

The taps came out when I pulled the vacuum hoses but the wipers, after some cleaning of both the motors and clearing a clogged tap, work fine.

Are the taps not supposed to be removed?

Also, I emailed the guy from the eBay auction and he replied:

Your pump is probably an OEM pump and this is an Airtex rebuild after-market pump, which is why it looks different. I am positive that it would work for your application, it just might not look the same as the OEM pump

The factory EB pump has 10 screws holding the top plate on and is manufactured by Carter.

I've been researching pumps but haven't come across one with 10 screws on top. The most I've seen is 8. Do you have a picture and part number for a Carter OEM pump with 10 screws?
 
Last edited:
Top