BRONCOBERT
Sr. Member
- Joined
- Sep 2, 2012
- Messages
- 731
My Bronco sitting on level ground. My rear shocks don't look like they have much up travel. Could that be a problem?
Thanks Dudley You can see pictures of the Bronco if you click on my Garage under my username and avatar.
I love the whole Duff package with 8 shocks and would hate to remove 2 of them. My biggest concern is the short amount of up-travel I have remaining, the rear Duff bump-stop is about 4 1/8 inch from contact so my thinking is the shocks would be damaged before the bump ever comes into play.
I only have debugging road miles on the Bronco so I don't think it has ever bottomed out on the street but I am assuming it would off-road.
One thought I have is maybe using the brackets for the 2 inch body lift, I assume I would have to notch out part of the lip on the inner wheel well which would give me an extra 2 inches. Has anyone tried this, I think I remember seeing pictures?
Thanks Dudley You can see pictures of the Bronco if you click on my Garage under my username and avatar.
I love the whole Duff package with 8 shocks and would hate to remove 2 of them. My biggest concern is the short amount of up-travel I have remaining, the rear Duff bump-stop is about 4 1/8 inch from contact so my thinking is the shocks would be damaged before the bump ever comes into play.
I only have debugging road miles on the Bronco so I don't think it has ever bottomed out on the street but I am assuming it would off-road.
One thought I have is maybe using the brackets for the 2 inch body lift, I assume I would have to notch out part of the lip on the inner wheel well (as my body-mounts measure just under 1 inch) which would give me an extra 2 inches. Has anyone tried this, I think I remember seeing pictures?
Just wondering do these shocks become progressively stiffer as they compress? I know some shocks do to help with the last 1/4 of travel to help prevent bottoming out.
Also would the Brackets for the 2" body-lift bolt up in the same spot my current one does or would I have to drill new holes in the frame, also the mounts that are welded on the 9" rear end could they be used in the current position or would new ones need to be re-positioned and welded on?






