• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What steering wheel looks right on EBs?

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I've gone through several OE type steering wheels, because in Az. they crack after a few years and cost big $ to replace. Both the '66-'73 and the '74-'77 types dry out and gaps appear. With power steering I don't need the 17" diameter so a 15" wheel like Ford used in '80 trucks would be better if it worked on the EB column. The after market seems preoccupied with bling. They just don't look like they belong in a restored Bronco interior. Any ideas?
 

gray gables

Sr. Member
Joined
Aug 7, 2013
Messages
742
very good question. Does anyone have a wood steering wheel on there ride out there?
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
I had a wood wheel back in the day, it seemed to last a year or three then badly peeled, cracked. That was back when Phoenix was known for being hot though... This is the only place I know that when you pull up at a light and you see a guy wearing oven mitts, you think, that's a great idea.
 

americanhorses

Bronco Guru
Joined
Jun 28, 2002
Messages
1,139
Loc.
Clovis, California
very good question. Does anyone have a wood steering wheel on there ride out there?

Had mine on for over 20 years. I like the size. The walnut is easy to put a new finish on. I think I'm going to adapt the OE horn button. I've seen it done on some others. Can't remember who.
 

Attachments

  • 002.jpg
    002.jpg
    90.5 KB · Views: 630
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I'm not too optimistic about the wood lasting as long as the hard plastic OE wheels here in Tucson. The Grant thick rubber types don't crack,but their horn button is a POS that rarely works for long. They make a stainless 3 spoke, 15" rubber or wood grip for Mustangs. The horn button is no better but it at least looks good in a '60s-'70s Ford.
The OE type repro '65-'66 Mustang wheels are as expensive as the truck wheels. They have good horns, are 15", look good, and should work with the Bronco column. I bet they still crack but I don't know. If you could rubber coat the grip like Stroppe did on the Bajas they would be perfect.
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
That's very close to the one I mentioned except for the slotted spokes. I think the Mustang version has round holes instead of the slots. The crappy Grant horn is still there.
I just found a Grant web sight that lists a billet horn button with the Ford oval in the center. Maybe we can have a long lasting, good looking, EB steering wheel with a good horn button.
They (Grant) call these wheels their Classic Series. They are a bit more flashy than the originals, but they are rugged, attractive, and look right on a 40yr. old truck.
 

apiper

New Member
Joined
Apr 2, 2012
Messages
36
"Here's mine, it's a 15" diameter.

Check out this guys link.....he has lots of steering wheels that will work on the EB and many look really good."


Rmally...do those kits adapt to the stock horn ?
 

Lmfp

Bronco Guru
Joined
Jun 28, 2011
Messages
1,496
Loc.
Lake Charles, LA
Had mine on for over 20 years. I like the size. The walnut is easy to put a new finish on. I think I'm going to adapt the OE horn button. I've seen it done on some others. Can't remember who.

I have pretty much the same wheel except my grips are rubber. Works pretty good and it was cheap ;D
 

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
I am running a late '70's-early 80's Ford wheel.

Like this. They make them without the cruise control buttons as well.
 

Attachments

  • wheel.jpg
    wheel.jpg
    121.8 KB · Views: 228
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I checked out a 1980 wheel, but the back side seems to be for a much larger diameter shift collar. I'm not sure about the '78-'79 big Bronco wheels but I thought they were also made for the large diameter shift collar. The later wheels had extra contact rings for the speed control.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I just run grant wheels on both mine. I cover em with one of those cheap velour covers whenever parked to save em frome the elements being topless in so cal
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
any without cold hard steel as a main part of the wheel, as in Hotter an heck steel in PHX?
 
Top