Hi,
11/16/14 - Still available. Price is $700 plus shipping. I would disassemble to reduce the cost of shipping if anyone is interested.
The previous owner of our '70 Bronco was quite a craftsman when it came to wiring / electrical. His setup consisted of Auto Meter gauges mounted in a custom built IP and electrical switches mounted on a plate that attached to the top of a custom built console (which also contained the Ron Francis fuse panel). The pictures are representative of both panels. (Wiring is shown for the switch panel. The wiring on the back side of the IP is the same quality.)
I would like to gain the space back for a console, and go back to a more traditional looking dash.
I'm posting to see if there is any interest in both assemblies. I would like a fair price considering the hardware value and the quality of work performed by the previous owner. I know it's probably a long shot; but, I thought I would post this up to see if there is any interest. It would only make sense if someone was looking to replace their entire IP and give up some additional real estate for the switches.
If I don't sell everything together, I will probably part them out after keeping some of the hardware (tach and switches, mainly) for the new build.
I'd be happy to answer any questions.
Thanks,
Jeff
11/16/14 - Still available. Price is $700 plus shipping. I would disassemble to reduce the cost of shipping if anyone is interested.
The previous owner of our '70 Bronco was quite a craftsman when it came to wiring / electrical. His setup consisted of Auto Meter gauges mounted in a custom built IP and electrical switches mounted on a plate that attached to the top of a custom built console (which also contained the Ron Francis fuse panel). The pictures are representative of both panels. (Wiring is shown for the switch panel. The wiring on the back side of the IP is the same quality.)
I would like to gain the space back for a console, and go back to a more traditional looking dash.
I'm posting to see if there is any interest in both assemblies. I would like a fair price considering the hardware value and the quality of work performed by the previous owner. I know it's probably a long shot; but, I thought I would post this up to see if there is any interest. It would only make sense if someone was looking to replace their entire IP and give up some additional real estate for the switches.
If I don't sell everything together, I will probably part them out after keeping some of the hardware (tach and switches, mainly) for the new build.
I'd be happy to answer any questions.
Thanks,
Jeff
Attachments
Last edited:











