• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

brushed or polished slot

67RT

Bronco Guru
Joined
Jan 17, 2014
Messages
1,308
I am sanding out some pits in my aluminum slots with intention of repolishing. I kind of like the brushed look after wet 800 grit. Does anyone prefer that look?
 

Attachments

  • 20141107_160157.jpg
    20141107_160157.jpg
    130.6 KB · Views: 170
OP
OP
67RT

67RT

Bronco Guru
Joined
Jan 17, 2014
Messages
1,308
I got to 1000 grit and like it. To make perfect and polish it will take too much elbow grease. I think i will try this for a while.. thanks!
Another bright note is that for the first time since I bought it I locked out the hubs and put it into 4 low and high with no issues
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
polished....been that way for many years on mine and love them
 

Attachments

  • tasker's.jpg
    tasker's.jpg
    87.6 KB · Views: 103

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
IMO, it depends on the build. I prefer the machined/brushed look for a more vintage feel.

I have asked and tried to get US Mags to offer that in addition to their polished and black finishes, but no luck so far.
 
OP
OP
67RT

67RT

Bronco Guru
Joined
Jan 17, 2014
Messages
1,308
IMO, it depends on the build. I prefer the machined/brushed look for a more vintage feel.

I have asked and tried to get US Mags to offer that in addition to their polished and black finishes, but no luck so far.
THat would be great as it is very hard to get a good satin finish by hand with wet sandpaper
 

nutter3

Full Member
Joined
Jul 28, 2005
Messages
325
I just got a set of vintage rims I was planning on polishing, but may have to rethink that now, as the brushed look is cool too.

Sorry for the hijack,but since we are talking about it.... Once you have your rims either brushed or polished, would a powder coater be able to do a clear coating? And how would it look? I have contacted a local powder coater, and they say they can do clear. I'm thinking that would keep them looking good, without the maintenance.
 
OP
OP
67RT

67RT

Bronco Guru
Joined
Jan 17, 2014
Messages
1,308
I just got a set of vintage rims I was planning on polishing, but may have to rethink that now, as the brushed look is cool too.

Sorry for the hijack,but since we are talking about it.... Once you have your rims either brushed or polished, would a powder coater be able to do a clear coating? And how would it look? I have contacted a local powder coater, and they say they can do clear. I'm thinking that would keep them looking good, without the maintenance.

On my Mopar i restored all of the anodized aluminum myself ghetto style by stripping the coating with easy-off, polishing with wet sand then buffer wheel to a shine. I use mothers on it regularly and it does not oxidize. I wasw told not to clear it as it doesnt really adhere to the wheel, just itself, and if it chips it will eventually peel and look fugly. I am not sure though. I am just going to keep them waxed and see how it goes. I have only done one but I like it..
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
THat would be great as it is very hard to get a good satin finish by hand with wet sandpaper

When I get my gap bed lathe set up, I plan to different grades of Norton Beartex or 3M Scothbrite pads and wheels/balls
 
Top