• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need Help finding a Good Carb! Almost sank my EB!!

jeev

Sr. Member
Joined
Feb 13, 2003
Messages
367
Loc.
VEGAS BABY!!!!
Just took my 66 out on some serious trails yesterday. I was amazed at its capability!!! But when I would hit any substantial hill it would bogg down and almost stall then run like sheet until I let it rest for about 20min. Let me tell you it is not a good feeling when you are going up a wet clay hill and at the bottom there is a curve with a deep stream on each side that you will fall into if you loose power and slide backwards... So I need to find a carb that will not do this.. I have a 4bbl Edelbrock performer on my 289 now. I am looking at the offroad one Holley offers - Someone also recomended the Quadrajets but I was quoted at $400 for that one!

Any ideas? How well does the ofroad kit that Edlebrock offers work? Thanks and sorry about the long post ;)
 

wildbill

Old Bronco Guy
Joined
Jun 29, 2001
Messages
6,890
:p :p :p The offroad kit will help and also lower the float level a little it sounds like your flooding it some. That is what I did to my carter 625 and it seams to be working ok. good luck. ::) ::) ::) Bill 8) ::) :p
 

66horse

Bronco Guru
Joined
Jan 7, 2002
Messages
3,394
bcbroncos has quadrajets for $250.00 and they are rebuilt for offroad.
 
OP
OP
J

jeev

Sr. Member
Joined
Feb 13, 2003
Messages
367
Loc.
VEGAS BABY!!!!
[quote author=jeepster link=board=5;threadid=15689;start=0#msg118726 date=1048717965]
Quadrajet - hillbilly fuel injection ;D
[/quote]

Are you saying they suck?
 

Jeepster

Bronco Guru
Joined
Jul 13, 2001
Messages
1,507
no, not at all........from what I understand they're the next best thing to fuel injection.
 

desertrat302

Sr. Member
Joined
Nov 22, 2001
Messages
503
Loc.
Tucson,Az
BC's Q-jets kick a$$.I used to have a Carter(Edelbrock) on mine,hated it.Mine runs great now with the BC Q-jet,one of the best things I've done to my Bronco.
 
OP
OP
J

jeev

Sr. Member
Joined
Feb 13, 2003
Messages
367
Loc.
VEGAS BABY!!!!
[quote author=DesertRat302 link=board=5;threadid=15689;start=0#msg118735 date=1048719116]
BC's Q-jets kick a$$.I used to have a Carter(Edelbrock) on mine,hated it.Mine runs great now with the BC Q-jet,one of the best things I've done to my Bronco.
[/quote]

Looks like I'm getting a Q-jet... Thanks all. Does anyone want to buy my 4bbl Edelbrock? It's almost new, the guy I bought my 66 from said it had less than 1500 miles on it and I have only driven 200miles since I bough it? let me know....

Thanks. snj.prs@verizon.net
 

GRIZZLY

Bronco Guru
Joined
Jul 31, 2001
Messages
3,221
Loc.
Lakewood, CA
[quote author=jeev link=board=5;threadid=15689;start=0#msg118738 date=1048719603]
[quote author=DesertRat302 link=board=5;threadid=15689;start=0#msg118735 date=1048719116]
BC's Q-jets kick a$$.I used to have a Carter(Edelbrock) on mine,hated it.Mine runs great now with the BC Q-jet,one of the best things I've done to my Bronco.
[/quote]

Looks like I'm getting a Q-jet... Thanks all. Does anyone want to buy my 4bbl Edelbrock? It's almost new, the guy I bought my 66 from said it had less than 1500 miles on it and I have only driven 200miles since I bough it? let me know....

Thanks. snj.prs@verizon.net
[/quote]I've got my performer sitting in the garage and Chuck's Q-jet on the bronco too.....
 

toy_truck

Jr. Member
Joined
Feb 19, 2002
Messages
67
Loc.
Alpharetta
I'll be pulling my Edelbrock and putting on a Q-Jet along with my rebuild in May. I bought the Edelbrock brand new and then found out the it was the worst carb for offroading available........Lets just say I was in the same situation where I really did not want to stall.....to make a long story short the front right wheel broke off...not fun! :mad: I can't wait to go back to the same hill with a Q-Jet...Let's see who wins this time!
 

jr

Sr. Member
Joined
Apr 1, 2002
Messages
427
Loc.
Mililani, Hawaii
Did any of you try the Thunder Series AVS from edelbrock? Suppose to be good for offroading. Similar to Holley"s Offroad Avegener.
 

GRIZZLY

Bronco Guru
Joined
Jul 31, 2001
Messages
3,221
Loc.
Lakewood, CA
[quote author=toy_truck link=board=5;threadid=15689;start=0#msg118791 date=1048731335]
I'll be pulling my Edelbrock and putting on a Q-Jet along with my rebuild in May. I bought the Edelbrock brand new and then found out the it was the worst carb for offroading available........Lets just say I was in the same situation where I really did not want to stall.....to make a long story short the front right wheel broke off...not fun! :mad: I can't wait to go back to the same hill with a Q-Jet...Let's see who wins this time!
[/quote]Mine ended up costing me a radiator, fan, shroud and water pump. Also, getting pulled backwards down a fairly narrow hillside trail with rocks and no power steering......Now, I idle over the same stuff.
 

El Jefe

Bronco Guru
Joined
Oct 20, 2002
Messages
1,166
[quote author=jeev link=board=5;threadid=15689;start=0#msg118738 date=1048719603]
[quote author=DesertRat302 link=board=5;threadid=15689;start=0#msg118735 date=1048719116]
BC's Q-jets kick a$$.I used to have a Carter(Edelbrock) on mine,hated it.Mine runs great now with the BC Q-jet,one of the best things I've done to my Bronco.
[/quote]

Looks like I'm getting a Q-jet... Thanks all. Does anyone want to buy my 4bbl Edelbrock? It's almost new, the guy I bought my 66 from said it had less than 1500 miles on it and I have only driven 200miles since I bough it? let me know....

Thanks. snj.prs@verizon.net
[/quote]

How much for the edelbrock? Is this the right carb for the "performer 289" labeled intake manifold (4bbl)? How much more is it to make it off-road-worthy with the kit?
 
OP
OP
J

jeev

Sr. Member
Joined
Feb 13, 2003
Messages
367
Loc.
VEGAS BABY!!!!
How much for the edelbrock? Is this the right carb for the "performer 289" labeled intake manifold (4bbl)? How much more is it to make it off-road-worthy with the kit?

It is the right one for the "performer 289", thats what it is sitting on in my 66 right now. As far as the price send me an offer that you think is fair.

Thanks.
 
Top