• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Jackman wagon wheels

FRANKO289

Contributor
Bronco enthusiast
Joined
Jul 7, 2008
Messages
6,869
Jackman wagon wheels ...since a few of you ask !!!

Jackman made steel and aluminum 8-spoke wagon wheels.

The STEEL wagon rims are NOT something I would have on any of my vehicles !!
( daily driver or not )

Do to bad manufacturing welding and no bracing the welds between spoke and rim well would crack and brake / fail !
Majority of the time do to the lateral forces at cornering on front mounted rims !
Also over time accumulated rust in the area didn't help.

1st pic of the jackman logo is of a steel rim !!
 

Attachments

  • jackman%20rims%20005.jpg
    jackman%20rims%20005.jpg
    111.7 KB · Views: 753
  • JackmanQ.jpg
    JackmanQ.jpg
    75.2 KB · Views: 626
  • jacks-l1000.jpg
    jacks-l1000.jpg
    81.7 KB · Views: 612
  • jackman_wheels.jpg
    jackman_wheels.jpg
    82.7 KB · Views: 616
  • set-new-jackman-wheels-ii.jpg
    set-new-jackman-wheels-ii.jpg
    142.4 KB · Views: 429
  • Fullerton.jpg
    Fullerton.jpg
    99.5 KB · Views: 483
  • Jwheels.jpg
    Jwheels.jpg
    50.7 KB · Views: 488
Last edited:
OP
OP
FRANKO289

FRANKO289

Contributor
Bronco enthusiast
Joined
Jul 7, 2008
Messages
6,869
the aluminum once ....

15" light truck rims on the back side have a single brace on each spoke.
In raised numbers the rim size on one spoke and on the opposite side spoke you can find the Jackman logo.
 

Attachments

  • jackman22.jpg
    jackman22.jpg
    213.9 KB · Views: 678
OP
OP
FRANKO289

FRANKO289

Contributor
Bronco enthusiast
Joined
Jul 7, 2008
Messages
6,869
399strokerEB posted today this pic of a 15" wagon wheel w. dual braces ....
is it a jackman ? .... well
I have never seen a 15" rim w. dual fin bracing.
Until now I was under the impression only 1 ton 8-lug had that feature !

BUT it would not surprise me if the made some 15" rims w. add bracing for 4x4 F150 and vans !!
 

Attachments

  • jack-IMAG0854.jpg
    jack-IMAG0854.jpg
    68.7 KB · Views: 378
Last edited:
OP
OP
FRANKO289

FRANKO289

Contributor
Bronco enthusiast
Joined
Jul 7, 2008
Messages
6,869
mine .... just got them back today from polishing ( No clear / No powder coating ) ?
8x6.5 / 16.5 x 9.75s ... dual bracing ..one fin w. the rim size and the jackman logo !!!

1st pic ..the way I acquired them !


last pic ... slots are next of to polish ... just cant make up my mind which once i fancy more on my truck ! ;D
 

Attachments

  • DSCN0615.jpg
    DSCN0615.jpg
    133.5 KB · Views: 1,092
  • DSCN0989.jpg
    DSCN0989.jpg
    95.3 KB · Views: 410
  • DSCN0990x.jpg
    DSCN0990x.jpg
    286.8 KB · Views: 422
  • DSCN0988x.jpg
    DSCN0988x.jpg
    148.4 KB · Views: 503
  • DSCN0986.jpg
    DSCN0986.jpg
    105 KB · Views: 811
  • DSCN0994.jpg
    DSCN0994.jpg
    113.3 KB · Views: 597

JAFO

Bronco Guru
Joined
Dec 3, 2007
Messages
1,556
Loc.
Beaverdam
Never knew that about the Jackman wheels. I had those steel wheels on a 1979 Subaru 4x4 wagon I drove to Seneca Rocks in West VA for years back in the 80's and 90's when I rock climbed. All around those curvy mountain roads. Ignorance is bliss.
 
OP
OP
FRANKO289

FRANKO289

Contributor
Bronco enthusiast
Joined
Jul 7, 2008
Messages
6,869
Gotta be slots!

I was holding off about the 16.5 slots now for over 2 years hoping they would finally make a 17x10 w. blank/ no lug holes ...like so !! see pic
I could plug weld the fac. 5 lug holes ...but it also turns out that the hub surface is to small for 8 lug pattern !
It would soooo eliminate my dilemma w. the now very limited 35x12.5 /16.5 tire choice !

having friends w. a bad boy like so ( see last pic ) helps w. altering wheels !!
 

Attachments

  • 16.5$_55.jpg
    16.5$_55.jpg
    93.8 KB · Views: 1,501
  • wheel-wizard-.jpg
    wheel-wizard-.jpg
    29.5 KB · Views: 390
Last edited:

stupidboy

My wifes porn star.
Joined
Dec 29, 2009
Messages
5,790
Loc.
Morrisdale Pa.
looking forward to see what you did w. your Bad Santa rim set ! :p

I need to get those finished... Thats a lot of work smoothing ans polishing those fins ya know. I also need to get my contributor status back so I can put up some pics of what Bad Santa sent me.:eek:
 
OP
OP
FRANKO289

FRANKO289

Contributor
Bronco enthusiast
Joined
Jul 7, 2008
Messages
6,869
I need to get those finished... Thats a lot of work smoothing ans polishing those fins ya know. I also need to get my contributor status back so I can put up some pics of what Bad Santa sent me.:eek:

not a chance I would do it by hand !!! paint them and drop them of somewhere to have the fin edges cnc down by .33 mm !
 
OP
OP
FRANKO289

FRANKO289

Contributor
Bronco enthusiast
Joined
Jul 7, 2008
Messages
6,869
for the look you going for its about the only way !
 

Attachments

  • cnc_machiningx.jpg
    cnc_machiningx.jpg
    52.3 KB · Views: 340
OP
OP
FRANKO289

FRANKO289

Contributor
Bronco enthusiast
Joined
Jul 7, 2008
Messages
6,869
you could also chrome them. or 2 stage powder coat them ( silver flake first and color of choice 2nd )
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
The steel Jackmans also wouldn't stay tight because they were flat steel with no conical shape under the lugs. I also had them on a 79 Subaru. Passed on some aluminum ones a while back..DOH!
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
I have a set of the steel spoke Jackmans, aluminium slotted mags, fined Hurricane's and even Centerline like solids, all 16.5. Did not know that about the Jackmans, I am going to insp them very carefully now. I HAD a set of aluminium spoked Jackmans a while back, but sold them. Sad day for me, I loved that old school look.

It would soooo eliminate my dilemma w. the now very limited 35x12.5 /16.5 tire choice !

Military takeoffs Humvee BFG Baja T/A 37x12.50-16.5's are an ok tire.

16.5 choices seems like there are some here. http://www.4wheelparts.com/Tires/Je...c=13&t_s=536&t_pt=101509&Rim Diameter_PQ=16.5
 
Last edited:

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
My brother had a set of 8 lug 15" wheels that were slots.....i'll have to see if i have a picture of them
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Damn Franko.....you sure do know your classic wheels....
 
Last edited:
Top