• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

C4 kickdown linkage / cable

rbrodder

Jr. Member
Joined
Feb 15, 2017
Messages
63
Ok, I have a 351 Windsor with a Holley 4 bbl and a C4 with a B and M floor shiftet. I need some info on options for a kickdown linkage and or cable set up. Pictures would be great too. I think I need to add some additional bracket to the carb?
Thanks Rich
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
The OE kick down rod is the most reliable and simple. If you're into bling, you can have it chrome plated.
 

c0astie31

Full Member
Joined
Jun 27, 2015
Messages
157
I have a cable style from bc broncos
Works great, easy setup and great quality
 
OP
OP
R

rbrodder

Jr. Member
Joined
Feb 15, 2017
Messages
63
Jckkys...I don't have an original...well yet. The truck was converted from a 3spd. If you have a 4bbl, could you send me a pic of how its attached at the carb?
Thanks

rbrodder@sbcglobal.net
 

DJs74

Bronco Guru
Joined
Apr 1, 2014
Messages
1,135
Jckkys...I don't have an original...well yet. The truck was converted from a 3spd. If you have a 4bbl, could you send me a pic of how its attached at the carb?
Thanks

rbrodder@sbcglobal.net

If you choose to go with the factory rod, your carburetor will have to have the extra linkage to attach the rod to the throttle linkage. If you look at Summit Racing carburetors, there is a "Ford kickdown" option that needs to be checked in order to get the correct linkage. I have added the linkage to the carburetor before but it is a PITA, you have to take the entire primary shaft out and then obtain the correct linkage. I'm just letting you know that if your carburetor does not have the correct linkage, there is not much use in pursuing a factory rod.
If you go with an aftermarket cable, the kit should provide most everything. I installed a Lokar cable a couple years ago and there was one bracket missing and the cable was assembled incorrectly but other than that, the cable worked just as good as the factory rod.


DJs74
 
OP
OP
R

rbrodder

Jr. Member
Joined
Feb 15, 2017
Messages
63
If you choose to go with the factory rod, your carburetor will have to have the extra linkage to attach the rod to the throttle linkage. If you look at Summit Racing carburetors, there is a "Ford kickdown" option that needs to be checked in order to get the correct linkage. I have added the linkage to the carburetor before but it is a PITA, you have to take the entire primary shaft out and then obtain the correct linkage. I'm just letting you know that if your carburetor does not have the correct linkage, there is not much use in pursuing a factory rod.
If you go with an aftermarket cable, the kit should provide most everything. I installed a Lokar cable a couple years ago and there was one bracket missing and the cable was assembled incorrectly but other than that, the cable worked just as good as the factory rod.


DJs74

Thanks DJs74..
 
Top