• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

OBD2 port?

jason.k

Jr. Member
Joined
May 16, 2012
Messages
138
Loc.
Gulfport Ms
So I hate wires! EFI GUY Gary has helped a bunch so far. Stripping my harness now to send him. My question is what else do I need to get from my donor. Do I just take the OBD2 port out from under the dash and how does it plug into the harness? Do I need to remove the 3 plugs that are on the firewall? Any help pictures how you have done it I will take! Sorry if I didn't explain this very well I truly hate wiring.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I would take all of it that you can, if you hate it now you will hate it even more if you need to go to a junkyard and pull a second one to get what you didn't get the first time. Just grab all of it all the way to/through the firewall.

While you are pulling parts get the inertia roll-over switch from under the carpet on the passenger side and the wires for it too.

Get it all the first time, then you don't mess with it twice.
 
OP
OP
J

jason.k

Jr. Member
Joined
May 16, 2012
Messages
138
Loc.
Gulfport Ms
just remove it and leave about a foot of wire. You'll also need your inertia fuel shut off switch. And if you plan to run a Cruise Control include those connectors too.
Have you read his threads?

http://classicbroncos.com/forums/showthread.php?t=224697

Thanks wyflyer for the link. I did see that a few years back but I'll read it again to see how many of my questions it answers now I'm close to this project.
 
OP
OP
J

jason.k

Jr. Member
Joined
May 16, 2012
Messages
138
Loc.
Gulfport Ms
I would take all of it that you can, if you hate it now you will hate it even more if you need to go to a junkyard and pull a second one to get what you didn't get the first time. Just grab all of it all the way to/through the firewall.

While you are pulling parts get the inertia roll-over switch from under the carpet on the passenger side and the wires for it too.

Get it all the first time, then you don't mess with it twice.

True. I would be pretty mad pulling parts of the explorer I drug to the junkyard!
 
Top