• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Request for PTO information

slim811

Sr. Member
Joined
Mar 6, 2013
Messages
709
Anyone know the Ford part # for an EB PTO?Thank you, Slim.


Sent from my iPhone using Tapatalk
 

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
No Ford part number. Aftermarket parts. Much like dealer installed A/C

Which raises a question. Some Broncos came with a hand throttle, complete with a factory dash bezel that said "Throttle". I always thought that was for a PTO application. What else did the factory supply a hand throttle for?

(The reason I ask is that I got a hand throttle assembly off a Bronco in the junk yard a few decades ago and I am about to offer that for sale. I got it at the time because I thought it so unusual as to be just plain cool.)
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
Which raises a question. Some Broncos came with a hand throttle, complete with a factory dash bezel that said "Throttle". I always thought that was for a PTO application. What else did the factory supply a hand throttle for?

(The reason I ask is that I got a hand throttle assembly off a Bronco in the junk yard a few decades ago and I am about to offer that for sale. I got it at the time because I thought it so unusual as to be just plain cool.)

20160930_123340_zpsdqrrruq9.jpg
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
... This is just me being an old parts man. But I expect the PTO is nothing more than a New Process part.
Their all like about 8 bolts maybe 10 holding them on . & Dodge Ford & ANY ONE ELSE THAT USED THAT old NP 435 .. It just a flat plate that bolts to the side of the trans & a cable puts it in & out of gear .
I was thinking the one I was around years ago like 50 years . They just used one of those HEAVY DUTY CHOKE CABLES .
.... NOW I COULD BE TOTALLY WRONG BUT I don't think so.
& I EXPECT YOU CAN PIICK ONE UP AT MOST WRECKING YARDS.
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
10 bolts, attached to the transfer case. Shifter came up thru the tunnel just to the passenger side of the transfer case shifter.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Plenty of Broncos were sold with a hand throttle. Nothing related to PTO.
 
OP
OP
S

slim811

Sr. Member
Joined
Mar 6, 2013
Messages
709
Part # C8RX7275E 6 bolt pto unit . Thinking this may be for a F Series 67-72 with a different transfer case than a Dana 20 EB.


Sent from my iPhone using Tapatalk
 

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
OKIE, good post on the options list. But help me out here, as I am having trouble parsing all that information in the context of the factory hand throttle. Maybe too late in th day or something and my brain is going off line.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
I believe all the PTO's where either Ramsey or Koeing. I think you can find them on scouts and jeeps as well. Don't know if ford actually had a part number for them. Id suspect as was said they were not actually factory installed even though some literature suggest it. Most likely a dealer sourced/installed item even if it was ordered with a winch.
As for hand throttles they were a pretty common item in earlier years on lots of trucks I would suspect some areas where lots of farming and ranching was done that it was more common for vehicles to be optioned with it. As vehicle speed could be set and the truck could be loaded with little need for driver input. Also in those areas if would be more likely PTO's would be installed for winches or other equipment so it may have been a more common option in some areas than others. Have no idea if this was the case but I would imagine that it could be.
 

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
Which raises a question. Some Broncos came with a hand throttle, complete with a factory dash bezel that said "Throttle". I always thought that was for a PTO application. What else did the factory supply a hand throttle for?

(The reason I ask is that I got a hand throttle assembly off a Bronco in the junk yard a few decades ago and I am about to offer that for sale. I got it at the time because I thought it so unusual as to be just plain cool.)

I had a '72 6 banger that I parted out that had the hand throttle option. It didn't have any accessories like a plow or any of the other utility options it was just factory ordered on that particular Bronco.
 
Last edited:

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Back in the hand choke carburetor days, even regular passenger cars had had throttles. Useful for keeping them running when trying to get them warmed up on a cold morning.
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
My 71 and both 66 have the hand throttle. The roll cage in the 71' prevents me from using it, but I use them in the 66s.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
My 1974 Bronco out of Colorado has the hand throttle on it. My California 1974 does not have it. Both trucks have automatic chokes on the carbs.
 

rmk57

Sr. Member
Joined
Feb 24, 2016
Messages
580
No Ford part number. Aftermarket parts. Much like dealer installed A/C

Thats not entirely true. I have the original installation instructions from Ford and it does give a Ford part number. The pto is a Koenig unit and is not made by Ford but is sold through Ford so it did carry a Ford number.

Much like a lot their racing parts, MSD,Brembo, Edelbrock, aftermarket but use Ford part numbers.
 
Last edited:

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Would be interesting to see some parts with actual ford part numbers. I'm sure there are probably some out there but for the most part. That ford part number is just for a kit for either a 6 or 8cly. When one was ordered koenig probably just sent out that kit to a dealer.
Basically yes a option offered by ford, approved by ford, installed by ford dealers, but not may not of had parts that had ford part numbers. Just a authorized aftermarket part.
Now If someone could dig up a NOS ford part numbered winch kit that would be sweet.
 

CopperRanger

Bronco Guru
Joined
Sep 26, 2007
Messages
1,796
I have a set of original installation and operating instructions that were in the glove box of my 71. The part number for the whole kit is C6TZ-19E536-C, Ford Bronco with 289. It also lists all the individual parts, but they are all Koenig part numbers.
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
folks seem to be sayin that the 6 & 8 cyl PTOs were different.
I have the shafts, mount, shift, U joint and PTO. Didn't want the winch as I use an ele 1.
I C the removable plate on my transfer (is it D20? my rig has a D44 up frnt). The gears need to mesh w/the D20...is it a differently geared D20 in the 8 and 6?
I thought "1 sz fits all"...
 
Top