• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Quick-Latch hood pins or remote pull for new hood?

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
What do you guys think about this? I think those Quick-Latch buttons are pretty slick, but look like they could be a PITA. I was thinking about installing the locking QL pins with the center spring. I already have the WH hood shocks. I'm just debating on the "latch" part of it. The other option is that remote pull cable that JBG sells. Any opinions out there?
 

Hozr

Bronco Guru
Joined
Oct 15, 2011
Messages
1,439
Loc.
Rogue Valley, OR
I just did the quick latches and they can be a little finicky if not setup just perfect. Once aligned they are pretty slick
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
I have used the Quik-Latch on Fiberglass hoods and Carb Air Cleaners. They hold a lot of weight for how small they are. As stated, they have to be set-up dead on to work correctly.
 
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
Hozr and rguest- did you do the locking ones? Trying to figure out if the lock can be left open of if they have to be unlocked each time you want to release the pin. Do they stay tight and secure? Would you install them again?


Sent from my iPhone using Tapatalk
 
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
Do you have a link? I searched the site and did not find. Thanks.

Never mind, found them!



Looks like a cool option. Kinda expensive but so are the Quick Latch. I gotta buy all the hood latch hardware so its about the same anyway I go.


Sent from my iPhone using Tapatalk
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
Go to their website to look at details and especially their holding strength.

The one's with the added lock will go on my 77 Coyote.
 

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
I am doing a cable pull on my latest. I didn't want to drill my hood and it keeps a nice clean look. Mine is the BC Bronco version.
 

Tcb3078

Sr. Member
Joined
Jan 4, 2016
Messages
496
Loc.
Charlotte
I have them, but the mini. Love em
 

Attachments

  • 20181207_144056.jpg
    20181207_144056.jpg
    68.6 KB · Views: 167

LUBr LuvR

Contributor
Bronco Guru
Joined
Dec 31, 2015
Messages
2,228
I am doing a cable pull on my latest. I didn't want to drill my hood and it keeps a nice clean look. Mine is the BC Bronco version.

Did the cable pull from BC as well. Installed about 3 years ago, works well and very happy with it.
 
OP
OP
DC_Gearhead

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
Looks like BC is on backorder for their remote release. And JBG no longer carries them.


Sent from my iPhone using Tapatalk
 
Top