• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Boot alternative for transfer case shifter

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
I’m tired of using a boot for my twins on the t-case. They never last. Anyway, i want to explore the posibility of fabricating a brush style barrier instead of a boot.

You know, the wiskars that hug both sides of a ebrake lever or shifter in other cars?

Anyway, looking for cons to this idea and possible sources for parts.

Not looking for people to convince me my boot is installed wrong.
 

kylakekevin

Bronco Guru
Joined
Jan 11, 2017
Messages
1,294
The whisker brush doesn't seal out the elements like the boots, most ebrakes just have a hole for the cable to latch into. So how big of a hole is around your twin set up and will this even matter on your set up ,trail rig wouldn't matter as much. Maybe use a combination of a rubber gasket with a slit for each stick down low with a whisker brush up higher.
 
OP
OP
chuzie

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
Gonna go to hardware store and see what's on the shelves in terms of brushes.

I like the idea of an additional layer to help block the elements.

Tunnel hile is pretty big at the moment due to years of modifications, but can easily modify if need be.

My issue is my sticks are so close to one another (self imposed due to cab design constraints) the boot just gets killed as I shift a LOT on the trails.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

gnpenning

Contributor
Bronco Slave
Joined
Dec 26, 2011
Messages
2,601
Loc.
I have more questions than answers.
Pretty common in the garage door industry. In the links above they show some of the different lengths of brush available. You can also get the holder in different angles if needed. That way depending on your hump you could put on a 45deg holder upside down and keep the brush level with the flat portion of the hump. Your OCD may have some say about the look.....

Sorry, my suppliers don't sell to the public. We buy 8' and 10' lengths so shipping is a consideration. Not sure if I have any short pieces around. Lmk if you want me to check.
 

JB Fab

Sponsor/Vendor
Bronco Guru
Joined
Mar 21, 2004
Messages
1,518
The brush type barrier it typically used for areas the do not penetrate the floor, usually to keep things from falling into the console, or to keep french-fries out of the parking brake mechanism.
The first twin-stick I made, I used a brush type barrier and found that it did little to keep dust/heat out. I dropped into a mud-hole and had a geyser of mud in the cab.

My best version of the brush barrier included two layers of the brush with a slit layer of rubber in between
 
OP
OP
chuzie

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
What can I say, I love doing front digs!

Sent from my SAMSUNG-SM-G900A using Tapatalk
 
OP
OP
chuzie

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
The brush type barrier it typically used for areas the do not penetrate the floor, usually to keep things from falling into the console, or to keep french-fries out of the parking brake mechanism.

The first twin-stick I made, I used a brush type barrier and found that it did little to keep dust/heat out. I dropped into a mud-hole and had a geyser of mud in the cab.



My best version of the brush barrier included two layers of the brush with a slit layer of rubber in between



Well I don’t want to trade one problem for another. I wonder if there is a source for a stretchy / spandex type boot. Material would be thinner and possibly not get destroyed by my tight stick clearances (that’s what she said!). Hell it wouldn’t even have to be dual boot style. If sized correctly, it could be a single boot capable of tapering at the top so as to allow enough stretch for various gear modes.


Sent from my iPad using Tapatalk
 

BanditBronco

Sr. Member
Joined
Jul 2, 2008
Messages
690
I have used rubber sheet glued to the bottom of a fiberglass center console with a slit cut in it, on a non bronco application. I wouldn't recommend it. Maybe a neoprene boot? Like wet suit style material? I have had the same problem, my rubber boots didn't last, and neither did my jb fab vinyl one.
 

Timstrk

Full Member
Joined
Apr 8, 2014
Messages
198
See if I can splain it to you. You installed the boot wrong......
 

kylakekevin

Bronco Guru
Joined
Jan 11, 2017
Messages
1,294
Look for a horse neoprene neck wrap, that would be enough material to make a boot out of and should be a decent price for the material.
 
OP
OP
chuzie

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
Look for a horse neoprene neck wrap, that would be enough material to make a boot out of and should be a decent price for the material.
Good call. Thanks bud

Sent from my SAMSUNG-SM-G900A using Tapatalk
 
Top