• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Help finding a shifter boot for a Koenig winch

Remos69

Contributor
Sr. Member
Joined
Oct 23, 2017
Messages
710
Loc.
SW Florida
Reassembling my Koenig winch. The boot has seen much better days (years) so I am looking for boot suggestions as the original base is 3 1/8 W x 5 1/4 L. I can go longer but not much wider. Checked JEGs and Summit and the ones that actually show the size are way too wide and the others you cannot tell.
 

T-Bird

Sr. Member
Joined
Apr 12, 2015
Messages
938
Loc.
East TN
Most koenig winches were dealer installed and they used the early 66 tranfer case shifter boot. here is a repop of one.https://www.wildhorses4x4.com/product/Transfer-Case-Shifter-Boot-1966/Bronco_Dana_20_Shifters
The one pictured is an original one, if you can find a good used one prepare to pay $200. and up

6fccb2ce-b516-44ff-9e9e-d55e0c03cf1e-original.jpg

02c65090-f36b-47ae-91c6-eccb27209b06-original.jpg
 
Last edited:
OP
OP
Remos69

Remos69

Contributor
Sr. Member
Joined
Oct 23, 2017
Messages
710
Loc.
SW Florida
Yea, it was installed at a Ford dealer in Denver before it was driven off the lot, fender flares installed too at the same time. Not cheap for that boot! Thanks for the info. According to the original documents on the winch it is just what you said, same part numbers!
 

T-Bird

Sr. Member
Joined
Apr 12, 2015
Messages
938
Loc.
East TN
Yea, it was installed at a Ford dealer in Denver before it was driven off the lot, fender flares installed too at the same time. Not cheap for that boot! Thanks for the info. According to the original documents on the winch it is just what you said, same part numbers!

I've bought one from TBP about a year ago for my Koenig winch. The repops are the way to go.
 

JGbronc

Contributor
Bronco Maniac
Joined
Mar 30, 2007
Messages
6,390
Loc.
Hytop, Alabama
Nick at Northeast sells reproduction '66 shifter boots.

https://northeastclassicfordparts.c...rly-1966-new.html?search_query=boot&results=4

If I'm not mistaken, there were some Koenig setups that actually used the later '66 boot, which was slightly bigger. Some people refer to them as the V8 style since they showed up about the same time they began offering 289s. The early style should still work, but it's possible that your original holes may not line up and you'll have to drill more.
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
Nick at Northeast sells reproduction '66 shifter boots.

https://northeastclassicfordparts.c...rly-1966-new.html?search_query=boot&results=4

If I'm not mistaken, there were some Koenig setups that actually used the later '66 boot, which was slightly bigger. Some people refer to them as the V8 style since they showed up about the same time they began offering 289s. The early style should still work, but it's possible that your original holes may not line up and you'll have to drill more.

This ^^^^^^. I'm such a sucker for a PTO winch lol.
 
OP
OP
Remos69

Remos69

Contributor
Sr. Member
Joined
Oct 23, 2017
Messages
710
Loc.
SW Florida
Nick at Northeast sells reproduction '66 shifter boots.

https://northeastclassicfordparts.c...rly-1966-new.html?search_query=boot&results=4

If I'm not mistaken, there were some Koenig setups that actually used the later '66 boot, which was slightly bigger. Some people refer to them as the V8 style since they showed up about the same time they began offering 289s. The early style should still work, but it's possible that your original holes may not line up and you'll have to drill more.


New tunnel so new holes!
 
Top