• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

New owner from Germany

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
Welcome to the forum! I was stationed in Germany and had duties at cologne in the Reicert building. I believe it was a carpet factory before the army occupied it.

I was stationed at Flak Kaserne, Ludwigsburg, just north of Stuttgart.

Keep up the good work on that Bronco tody.
 
OP
OP
T

tody

Full Member
Joined
Mar 22, 2017
Messages
207
Another quick update: Got me a new set of rocker arm nuts. I suspected some of them worn. Adjusted the valves again, and thought that knocking noise was gone - nope, came back with the engine warm.
It's running a lot smoother, though. Apart from the readjusted valves, I put in new spark plug wires, and changed the Pertronix I for a spare II unit.

A squeak in the rear suspension needs to be fixed. Really annoying with the hard top gone. I think i will torque everything down again this weekend to see if this fixes anything.
 
OP
OP
T

tody

Full Member
Joined
Mar 22, 2017
Messages
207
Rear suspension squeak gone. Hit the Shackle-to-body bushing with WD40, all quiet now.

Also fixed: Glove box lock. The Bronco came with two keys, doors/ignition and rear hardtop. The hardtop lock was no Ford original, so I had no glovebox key.

Watched this video: https://www.youtube.com/watch?v=icq_D0v8RF0
Was able to match the glove box lock to my Mustang trunk key, so i can use the spare key on the Bronco.

Also, I plasti-dipped the Ford letters on the tailgate. Picture will follow!
 
OP
OP
T

tody

Full Member
Joined
Mar 22, 2017
Messages
207
IMG_3197.jpg
 
OP
OP
T

tody

Full Member
Joined
Mar 22, 2017
Messages
207
two steps forward, one step back...

frist step: installed three point seatbelts. used the bolt on the rollbar as the upper mounting point.

IMG_3200.jpg

IMG_3201.jpg


second step: put the hardtop back on. put in rivnuts, 3/8" on the body and 5/16" on the windshield frame. also put in rivnuts for the mirros.

step back: cracked a mirror base while tightening it down :(

also: the hardtop is rattling like crazy. the bows, at least the rear one is not attached to the hood panel anymore. were they glued on? can i take out a bow, clean it and put it back in?

finally, also hardtop related: is the liftgate adjustable side to side? it is set slightly to the passenger side, the gaps are uneven from side to side.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Why not just go w/a soft top if it's being difficult?
 

kempco

Jr. Member
Joined
Nov 11, 2015
Messages
53
I wedged a couple of shims in between the bows and the roof and then used some polyurethane in a caulking tube in between and removed the shims a couple days later. It seemed to work well.
 
OP
OP
T

tody

Full Member
Joined
Mar 22, 2017
Messages
207
i have a rubber bumper on my a-pillar, in the door opening. missing on the passenger side. factory or not? who carries replacements?

IMG_3219.jpg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
the hardtop is rattling like crazy. the bows, at least the rear one is not attached to the hood panel anymore. were they glued on? can i take out a bow, clean it and put it back in?
I wedged a couple of shims in between the bows and the roof and then used some polyurethane in a caulking tube in between and removed the shims a couple days later. It seemed to work well.

They've been generally inconsistent over the years. Even brand new, some were well adhered to the roof panel, while others had huge gaps at least partially around.
My '71 had one fully glued, while the other was very close but you could see where the polyurethane or whatever they used back then was not touching the roof panel at all.

Have seen some very good professionally fixed tops, but don't know what materials they used, or if they re-formed the braces to better meet the top.
Can't really form the top to suit the brace if the gap is too large, or the top won't have it's signature curve.

What did you use for shim material kempco? did the poly expand at all, or just act to fill the gaps as-is? Got any pics of the process?
Would be cool to see.

finally, also hardtop related: is the liftgate adjustable side to side? it is set slightly to the passenger side, the gaps are uneven from side to side.

Sometimes that gap is the body of the vehicle being inconsistent and pulling the hard top's side panels outward to one side more than the other.
but I think you can adjust it a little bit using the hinge bolts. I've never had to (knock on wood!) but it looks like it could have some minimal adjustment.
Probably enough, if so.

Paul
 

kempco

Jr. Member
Joined
Nov 11, 2015
Messages
53
They've been generally inconsistent over the years. Even brand new, some were well adhered to the roof panel, while others had huge gaps at least partially around.
My '71 had one fully glued, while the other was very close but you could see where the polyurethane or whatever they used back then was not touching the roof panel at all.

Have seen some very good professionally fixed tops, but don't know what materials they used, or if they re-formed the braces to better meet the top.
Can't really form the top to suit the brace if the gap is too large, or the top won't have it's signature curve.

What did you use for shim material kempco? did the poly expand at all, or just act to fill the gaps as-is? Got any pics of the process?
Would be cool to see.



Sometimes that gap is the body of the vehicle being inconsistent and pulling the hard top's side panels outward to one side more than the other.
but I think you can adjust it a little bit using the hinge bolts. I've never had to (knock on wood!) but it looks like it could have some minimal adjustment.
Probably enough, if so.

Paul

They were wood shims that I removed after the caulking set up. The polyurethane does not expand but it filled in the gap and made it quieter.
 
OP
OP
T

tody

Full Member
Joined
Mar 22, 2017
Messages
207
all good advice, thank you.

there's indeed a little adjustment in the liftgate hinges, not much but enough to center it side to side on the top. on the bottom, the gap on the driver side is bigger than on the passenger side.

starting to compile a list of parts missing, mainly rubber bumpers and weatherstrip bits and pieces. liftgate bumpers are rock hard, liftgate drains are missing completely.

i also tinkered around with the passenger side door. body lines don't completely match in the rear, but the again the passenger side rear quarter is a replacement, obviously welded in badly. lifting it up a little made it at least touch the weatherstrip on the hardtop. still have to slam it shut to get it close completely. but overall it's sort of flush.

winter projects will include taking off the passenger side fender to put in the missing j-nuts and finally bolting it on completely. hood will surely need to be adjusted afterwards.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
all good advice, thank you.

starting to compile a list of parts missing, mainly rubber bumpers and weatherstrip bits and pieces. liftgate bumpers are rock hard, liftgate drains are missing completely.
.

a list always helps for sure...
 
OP
OP
T

tody

Full Member
Joined
Mar 22, 2017
Messages
207
had a visit from a fellow member yesterday, who is visiting germany - mainly for the oktoberfest!

he brought me an antenna assembly, which was completely missing from my bronco. that was one of the parts i just could not justify buying yet due to shipment costs. size easily brings shipping in the $50-70 range, and with customs to pay a $200 price tag was just too high.

installed it today, which went rather well. my bronco came with an AM radio, which also was completely missing, and the dash was hacked up.
the fender had the antenna hole, but the kick panel was not drilled where the antenna cable comes trough. there were three dimples in the panel though, so i did not even have to do any measuring. pre-drilled it with a dremel, but then decided to take the speedo out and was able to sneak a cordless drill in there.
installation was a breeze, and the bronco now looks a little more complete!
 
Top