• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear axle housing stud install

Jaybr

Contributor
Sr. Member
Joined
Oct 8, 2019
Messages
587
Not sure this is the right way to do this but it worked well.

Got a new housing from WH and it didn’t have studs installed. I used a ball joint press with a piece of flatbar on the stud head and 2 sockets on top. They pressed right in with an impact, being very careful of course.

There is probably a tool for this but i don’t have it.


4eaa9bac689d87d50aa91007f25c5c8d.jpg

1c72faa07145b1eedf1c2af0006b9dd0.jpg



Sent from my iPhone using Tapatalk
 
Last edited:

techlaf

Sr. Member
Joined
Jun 28, 2008
Messages
692
Looks good. I have a new WH housing waiting for me to do the same thing. Thanks for posting your technique.

Did you weld on new shock mounts?

How are you painting it? Powdercoat before assembly or spray paint once all is complete, but before mounting back in the truck?
 
OP
OP
Jaybr

Jaybr

Contributor
Sr. Member
Joined
Oct 8, 2019
Messages
587
Haven’t welded the shock mounts yet, and being I’m a novice welder I may have a buddy do it.

I sprayed it with primer when I unboxed it just to keep from rusting. I will just spray it with rattle can chassis paint before I put it under the truck and touch up around the shock mounts when done.

Powdercoat would be nice but have to install everything to get the shock mounts right, then tear it all down for powdercoat and install a second time. I’m trying to build a really nice truck, but not a show truck, so not going that route.


Sent from my iPhone using Tapatalk
 

techlaf

Sr. Member
Joined
Jun 28, 2008
Messages
692
Good spray paint seems like a sensible approach to be able to touch it up after.

Did you make or find a vendor selling the little pliable pieces of metal tabs to hold the brake lines in place?
 
OP
OP
Jaybr

Jaybr

Contributor
Sr. Member
Joined
Oct 8, 2019
Messages
587
Did you make or find a vendor selling the little pliable pieces of metal tabs to hold the brake lines in place?


I haven’t gotten that far yet. Got the third member back in and everything cleaned and painted this weekend. Also had to finish removing the old housing and leafs today. Hopefully I’ll have time to get the axle assembled and back under the truck this week. I’m also going to have to try out my tube bending skills as I need to make a brake line on one side.


Sent from my iPhone using Tapatalk
 
Top