• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

"T" handeled shifter::boot?

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
Anything inside the '67/73 plastic boot? I never had the piece at the base. Pre 1982 when I got the rig that was 'gone'. Some1 got me the plastic cover (it looks mustang like too) & I've had the chrome handel (w/o button or spring) for 38 yrs.

Is there some kinda accordian boot inside that plastic cover at the bottom of the x-fer shifter? What 'indicates' the shift position in the lill window on it?

Thanks, can't recreate what U never saw...
 

tatersalad

Bronco Guru
Joined
Jan 17, 2009
Messages
1,067
If memory serves me right it's just the case. Been a long time since I removed one
 

SHX669

Bronco Guru
Joined
Jan 9, 2009
Messages
1,997
Visit Toms Bronco Parts website and look under Transfer case shifters. There is a picture of the " assembly " . The " housing " has 2hi - 4 hi and etc . And inside there is a sliding " indicator" with a hole in it that fits over the shift rod and a orange or red dot or slash . I've found there is some forward/backward adjustment with this setup. Put the shifter into 2 hi or 4 hi and then adjust the housing to match the shifter.
 
OP
OP
chrlsful

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
OK, "built by committee" works 4 me. - "an indicator" & a "foam piece" but no 'boot' or accordian type sleeve...
Now if I can just see (my other thread) an under shot of the driver's seat adjuster (I got 2 of the 3 spring, not the 3rd or the ill rectangular tin/its 2 rods).
Onward and upward (by bronk bros). Thank's Jeff's ! (my 1st after mrt purchase from them 1982, a 1/2 cab shipped 1500 mi for total $200).
 

tatersalad

Bronco Guru
Joined
Jan 17, 2009
Messages
1,067
OK, "built by committee" works 4 me. - "an indicator" & a "foam piece" but no 'boot' or accordian type sleeve...
Now if I can just see (my other thread) an under shot of the driver's seat adjuster (I got 2 of the 3 spring, not the 3rd or the ill rectangular tin/its 2 rods).
Onward and upward (by bronk bros). Thank's Jeff's ! (my 1st after mrt purchase from them 1982, a 1/2 cab shipped 1500 mi for total $200).

I posted picks on another thread of the seat tracks and springs this morning.
 
OP
OP
chrlsful

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
"...on another thread..."
dat's me !!
(...can just see (my other thread) ...")
'n thanks.
MORE to Go...
 
OP
OP
chrlsful

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
tiny lill parts search

Visit Toms Bronco Parts...There is a picture of the " assembly " . The " housing " has 2hi - 4 hi and etc . And inside there is a sliding " indicator" with a hole in it that fits over the shift rod and a orange or red dot or slash . I've found there is some forward/backward adjustment with this setup....
Still missin 4 or 5 of those pictured parts:
there's a lill finger upa bout 4 inches from the base stickin outa the shaft;
more plastic in the boot that must slide w/shifting movements (gota hole 4 shaft);
may B the 'lock out plate' (what's that? not for inside the Indicator Cover?);
and of course the pad ("...lill foam thing...") it was all mounted on.

Most its life I hada chrome eustation over a rubber boot on there. No T handle (kept it in the garage) and the white plastic button stuck up outside the top of the shaft. Thought it important but did not need to use it for any shifting...I put the chrome handle on but the black button'n spring seemed to have no effect/purpose. Made a wooden knob on - to to match what I put on the hurst 3 speed. Small points but like to get in back into operation. Too expensive? go back to the old but w/shinny, new...
 
Top