• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear bucket seat options

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I know I have seen threads about this in the past but didn't have much luck searching for it.
Looking at possibly changing the back seat setup to make it better for a car seat and have room for another rider and both be safely strapped in. This may not be feasible, not much room there. Anybody out there with buckets in the back? If so did it make it better for the back seat passengers?
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I looked at that really hard. The only aftermarket seat that I could find that offered the safety that I was looking for that actually fit with 2 was this. My wife said "nope, my hiney don't fit that."

https://www.prpseats.com/product/roadster-suspension-seat/

I wound up doing a bench from the same company, its comfortable, it fits better and still provided the safety I was looking for. it also keeps the area more usable by having room for a larger ice chest or whatever you might need for different types of trips or activities.
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
I used the rear seats from a 2 door Explorer. I had to modify the seat cushions slightly but they fit between the wheel wells, are comfortable and used the 3 point belts. I currently don’t have them in due to 4 linking it and raising the rear floor for a larger gas tank. I’m not even sure if I have pictures of the install. I’ll try to see if I do.
 

JSBX

Contributor
Sr. Member
Joined
Mar 10, 2010
Messages
652
Seat

I bought a seat out of a Transit van from a company that installs wheel chair lifts. It looks like it will fit two small adults or children. It is a 32" wide seat for two with two 3 point seat belts integrated in the seat. It is a high back seat and with the bottom factory mount removed will sit about 3-4" off the floor. Will have to build angle iron brackets to bolt it to the floor. It is black vinyl and has removable headrest. I don't know if you put a car seat in it if you will still have room for a another person or not. I can check and see when I get home next week and will let you know.
James.
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I bought a seat out of a Transit van from a company that installs wheel chair lifts. It looks like it will fit two small adults or children. It is a 32" wide seat for two with two 3 point seat belts integrated in the seat. It is a high back seat and with the bottom factory mount removed will sit about 3-4" off the floor. Will have to build angle iron brackets to bolt it to the floor. It is black vinyl and has removable headrest. I don't know if you put a car seat in it if you will still have room for a another person or not. I can check and see when I get home next week and will let you know.
James.

And here they are. Thank you sir

James paid for and picked up 2 of these for me and held until Bradlee could drive to his place and get them for me. Probably spring before working on the install but it looks like they should work fine as he described.
 

Attachments

  • Seats - rear seats.jpg
    Seats - rear seats.jpg
    126.6 KB · Views: 188

Audifan

Contributor
Full Member
Joined
Nov 25, 2018
Messages
250
Most of the bucket seats are going to be 20"+ wide, which means to fit them in the back you'll need a shoehorn and it won't look pretty. Functionality is also questionable.

We decided to remove 1.5" from the inside of each wheel well to allow for more room.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
And here they are. Thank you sir

James paid for and picked up 2 of these for me and held until Bradlee could drive to his place and get them for me. Probably spring before working on the install but it looks like they should work fine as he described.

spring yeah likely if you got em tucked away for winter :D

hate cold :)
 

Boss Hugg

Contributor
Bronco Guru
Joined
Jun 8, 2010
Messages
2,213
So I just realized I can very possibly just mount the shoulder strap to the back of the seats I already have set up in my Bronco. But I'd really love to find another set of them and test how much force it takes to break them and let the back fall forward with a kid strapped in.

Also, I was looking around and I'm gonna keep my eyes open for a set of 3rd row seats from a 2013 Gen Explorer. With the right mounting system and adding a shoulder strap as mentioned above, these may be sweet options.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
So I just realized I can very possibly just mount the shoulder strap to the back of the seats I already have set up in my Bronco. But I'd really love to find another set of them and test how much force it takes to break them and let the back fall forward with a kid strapped in.

Also, I was looking around and I'm gonna keep my eyes open for a set of 3rd row seats from a 2013 Gen Explorer. With the right mounting system and adding a shoulder strap as mentioned above, these may be sweet options.

shoulder straps definitely a plus w/what we do
 

Boss Hugg

Contributor
Bronco Guru
Joined
Jun 8, 2010
Messages
2,213
Third row Explorer seat in mine.

Can they be separated easily and mounted on the brackets my current seats have? Also, you've got the covers off there. Can I add brackets to mount the shoulder belts to the back of the seat? I've gotten rid of the floor mounted bracket and built pockets into the floor to lower the seats, so I'd like to stay with that quick release system, but get better seats in it.

child seat 6.jpg
 
Top