So, this showed up this morning. A buddy of mine found this solid 77 in Texas, and after finding out I am a sucker for a 77 Early Bronco he got it and brought it over. Yes, I purchased another Bronco. Thanks Jeremy.
Marti Report tells me:
1977 Wagon
Feb 77 Build
Copper Metallic
302, 3-Speed
Non Power Disc Brakes
Power Steering
Passenger and Rear Parchment Seats
Chrome Bumpers
Tire Carrier
Houston DSO
As it is now.
Single Stage Red Pearl - It's ok. Presentable, but I'll give it a 6 out of 10.
Super Lift Front Coils and Shocks - 2", Very Stiff
Add-A-Leaf Rear Springs - More stiffness
3" Body Lift - With all the Mods to make that happen and that will be changed back to original.
Previous Owner Option Welded Bumpers Front and Rear - Yikes!
Front Floor boards have been covered with sheet metal.
Rest of Body is pretty solid with No other RUST at all. Engine needs a tune up. (old fuel?) Exhaust is shot.
First is to remove the side steps and Welded on bumpers. Lets see how long this takes.
I already have a complete 2 1/2" WH suspension lift waiting for the next Bronco, so I'll use it on this one. I will add a lower 2" Body Lift, Adjustable Trac Bar, Sway Bar and T-Rex arms up front.
The current tires and wheels went with the delivery guy, Jeremy, who will use them on his project.
Clutch is shot from too much tire (34s) and too little gear. (3.50)
305/70/17s and Slots will go on after the suspension is complete and Axles and Brakes are redone.
The list is already getting long, but I will do this one piece by piece as much as I can so I can still have a driver.
Marti Report tells me:
1977 Wagon
Feb 77 Build
Copper Metallic
302, 3-Speed
Non Power Disc Brakes
Power Steering
Passenger and Rear Parchment Seats
Chrome Bumpers
Tire Carrier
Houston DSO
As it is now.
Single Stage Red Pearl - It's ok. Presentable, but I'll give it a 6 out of 10.
Super Lift Front Coils and Shocks - 2", Very Stiff
Add-A-Leaf Rear Springs - More stiffness
3" Body Lift - With all the Mods to make that happen and that will be changed back to original.
Previous Owner Option Welded Bumpers Front and Rear - Yikes!
Front Floor boards have been covered with sheet metal.
Rest of Body is pretty solid with No other RUST at all. Engine needs a tune up. (old fuel?) Exhaust is shot.
First is to remove the side steps and Welded on bumpers. Lets see how long this takes.
I already have a complete 2 1/2" WH suspension lift waiting for the next Bronco, so I'll use it on this one. I will add a lower 2" Body Lift, Adjustable Trac Bar, Sway Bar and T-Rex arms up front.
The current tires and wheels went with the delivery guy, Jeremy, who will use them on his project.
Clutch is shot from too much tire (34s) and too little gear. (3.50)
305/70/17s and Slots will go on after the suspension is complete and Axles and Brakes are redone.
The list is already getting long, but I will do this one piece by piece as much as I can so I can still have a driver.
Attachments
Last edited:











