• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Back Seat Brackets

Tulsa76bronco

Sr. Member
Joined
Apr 23, 2013
Messages
635
I am going to put two single Corbeau seats in the back of EB instead of a bench. Has anyone have pictures of what they did to make their custom bracket? I was thinking of one bracket that both seats can bolt onto made out of 1 inch tube.

let me know if there is a thread on this or send me some pics of yours. I would like to use the factory holes

thanks
 

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
Yes, I've done this. I built a sub-frame out of 1" round tube that bolts to the factory seat location. I will be adding a second seat as soon as our youngest is old enough. Works great.


20180418_211440.jpg


20180418_211454.jpg


20180420_200245.jpg


20180420_200227.jpg
 
Last edited:
OP
OP
Tulsa76bronco

Tulsa76bronco

Sr. Member
Joined
Apr 23, 2013
Messages
635
how wide is that seat I just measured mine and the top width of seat is 20 inches not sure I am going to have enough room for both
 
OP
OP
Tulsa76bronco

Tulsa76bronco

Sr. Member
Joined
Apr 23, 2013
Messages
635
are both the front and back tube same height if so what is it or did you make back lower for seats to lay back more
 
OP
OP
Tulsa76bronco

Tulsa76bronco

Sr. Member
Joined
Apr 23, 2013
Messages
635
sorry lot of questions as I like yours how wide and long is your set up it looks like you went past the bolt down holes? by how much
 

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
how wide is that seat I just measured mine and the top width of seat is 20 inches not sure I am going to have enough room for both


I'm not sure, they are older prp kids suspension seats that aren't offered any longer. I will try to get a measurement if I get a chance.
 

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
sorry lot of questions as I like yours how wide and long is your set up it looks like you went past the bolt down holes? by how much


I don't recall off hand, it is largely dependent on the mounting points of your seats.
 
Top